HardLabs

TPM-PHANTOM — Trusted Platform Module Bus Analyzer

jayis1·hacker-devices·tpm-phantom/kicad/tpm-phantom.kicad_pcb

TPM-PHANTOM — Trusted Platform Module Bus Analyzer layout, top view — open source STM32 board by jayis1

About the TPM-PHANTOM — Trusted Platform Module Bus Analyzer

TPM-PHANTOM — Trusted Platform Module Bus Analyzer is an open source STM32 PCB design by jayis1, published on GitHub. It is a 4-layer board measuring 60 × 30 mm, with 9 components from 9 distinct parts.

Its main chip is the STM32H743VIT6, from the STM32 family. Other key parts include the nRF52840-QFAA, AMS1117-3.3 and USBLC6-2SC6. By type, the board carries 4 ICs, 4 connectors and 1 crystal.

It belongs with the iot & wireless designs in this gallery.

From the project

Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

Author: jayis1 License: Hardware: CERN-OHL-S v2 · Firmware: GPL-2.0 · App: MIT Version: 1.0 BOM Cost: ~$72 at 1K volume

This device is for authorized security research, penetration testing, and red team operations ONLY.

The tpm-phantom is designed to help security researchers understand TPM communication, audit TPM implementations, and test the security of systems that rely on TPM for measured boot, disk encryption key sealing, and platform integrity attestation.

Main components on the TPM-PHANTOM — Trusted Platform Module Bus Analyzer

STM32H743VIT6nRF52840-QFAAAMS1117-3.3USBLC6-2SC6

TPM-PHANTOM — Trusted Platform Module Bus Analyzer bill of materials (BOM)

9 components, 9 distinct parts.

QtyPartRefs
1
STM32H743VIT6
U1
1
nRF52840-QFAA
U2
1
AMS1117-3.3
U3
1
USBLC6-2SC6
U5
1
25MHz
Y1
1
USB-C 2.0
J1
1
LPC Probe
J2
1
SPI TPM Probe
J3
1
MicroSD
J4

TPM-PHANTOM — Trusted Platform Module Bus Analyzer design files

The KiCad project lives in the jayis1/hacker-devices repository on GitHub; these links point at the commit this page was built from.

TPM-PHANTOM — Trusted Platform Module Bus Analyzer: common questions

What microcontroller does the TPM-PHANTOM — Trusted Platform Module Bus Analyzer use?

The TPM-PHANTOM — Trusted Platform Module Bus Analyzer is built around the STM32H743VIT6, from the STM32 family.

How big is the TPM-PHANTOM — Trusted Platform Module Bus Analyzer?

The TPM-PHANTOM — Trusted Platform Module Bus Analyzer measures 60 × 30 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the TPM-PHANTOM — Trusted Platform Module Bus Analyzer?

9 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the TPM-PHANTOM — Trusted Platform Module Bus Analyzer design files?

From the jayis1/hacker-devices repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the TPM-PHANTOM — Trusted Platform Module Bus Analyzer design in my own project?

The repository has no license, so all rights stay with jayis1. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TPM-PHANTOM — Trusted Platform Module Bus Analyzer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in hacker-devices

Similar boards