HardLabs

Speek amp

JBlitzar·speek·speek-amp/PCB/speek_amp/speek_amp.kicad_pcb

Speek amp PCB layout, top view — open source board by JBlitzar
Simulate this board

About the Speek amp PCB

Speek amp is an open source PCB design by JBlitzar, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 120 × 80 mm, with 98 components from 31 distinct parts.

Other key parts include the TPA3116D2DAD, CYA0630-10UH, XT60-M., PDMTAT068125-151MLU and 50PX4700MEFC18X40. By type, the board carries 60 capacitors, 19 resistors and 18 ICs.

It belongs with the audio designs in this gallery.

From the project

speek monorepo

A modular speaker system. Right now, it has a couple of boards:

- Speek Amp: This is the flagship amplifier. It's a hybrid 2.1 design using the TPA3116D2 chip. It's built to handle 4Ω speakers. It outputs lines for a mono subwoofer, two stereo woofers, and two stereo tweeters. - Speek RX: This is a Bluetooth audio receiver. It runs off of a qfn esp32 D0WD v3 and has a built-in headphone amp, or a normal line out for chaining. - Speek PSU: This is a supporting PSU board. It has a USB-C PD trigger (for quick tests) and a barrel jack port for proper power (needed to power real flagship…

Speek amp, from the project README
From the project README

Main components on the Speek amp

TPA3116D2DADCYA0630-10UHXT60-M.PDMTAT068125-151MLU50PX4700MEFC18X40DB301V-3.5-2P-GN-S

Speek amp bill of materials (BOM)

98 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
TPA3116D2DAD
TPA3116D2DAD_C2865736
TI(德州仪器)
U1, U10
6
CYA0630-10UH
10uH
SHOU HAN(首韩)
U2, U3, U5, U6, U13, U14
1
XT60-M.
XT60
AMASS(艾迈斯)
U4
2
PDMTAT068125-151MLU
PROD(谱罗德)
U7, U8
1
50PX4700MEFC18X40
Rubycon(红宝石)
U9
1
DB301V-3.5-2P-GN-S
R_Tweeter
DORABO(地博电气)
U11
1
DB301V-3.5-2P-GN-S
R_Woofer
DORABO(地博电气)
U12
1
DB301V-3.5-2P-GN-S
L_Tweeter
DORABO(地博电气)
U15
1
DB301V-3.5-2P-GN-S
L_Woofer
DORABO(地博电气)
U16
1
DB301V-3.5-2P-GN-S
L_Sub
DORABO(地博电气)
U17
1
DB301V-3.5-2P-GN-S
J1
DORABO(地博电气)
U18
1
PJ-320D
SHOU HAN(首韩)
in_1
6
CL05B104KB54PNC
100nF
YAGEO(国巨)
C1, C8, C16, C43, C54, C55
1
CC0603KRX7R9BB104
100nF
YAGEO(国巨)
C2
2
W312G685JS8SA1C0EC
6.8uF film
WEIDY(纬迪)
C3, C36
2
47UF
47uF
C4, C37
2
22UF
22uF
C5, C38
8
CL05A105KA5NQNC
1uF
HRE(芯声)
C6, C30, C31, C32, C33, C41, C42, C45
11
0402B102K500NT
1nF
SAMSUNG(三星)
C7, C10, C17, C26, C27, C28, C29, C56 +3
4
220UF
220uF
C9, C15, C52, C53
Show 11 more
QtyPartRefs
8
CL05B224KO5NNNC
220nF
SAMSUNG(三星)
C11, C12, C13, C14, C48, C49, C50, C51
6
0603B103K500NT
10nF
YAGEO(国巨)
C18, C19, C20, C21, C22, C23
4
10UF
10uF
C34, C35, C39, C40
6
CC0805KKX7R9BB684
680nF
YAGEO(国巨)
C44, C46, C47, C60, C61, C70
8
RC0402FR-073R3L
3.3
YAGEO(国巨)
R1, R6, R7, R8, R9, R13, R18, R19
4
0402WGF1003TCE
100k
YAGEO(国巨)
R2, R5, R14, R15
3
0402WGF1002TCE
10k
YAGEO(国巨)
R3, R4, R20
1
0805W8F5601T5E
5.6k
UNI-ROYAL(厚声)
R10
1
RT0603BRD073K2L
3.2k
YAGEO(国巨)
R11
1
0603WAF4702T5E
47k
FOJAN(富捷)
R12
1
0603WAF7502T5E
75k
UNI-ROYAL(厚声)
R21

Speek amp design files

The KiCad project lives in the JBlitzar/speek repository on GitHub; these links point at the commit this page was built from.

Speek amp: common questions

How big is the Speek amp PCB?

The Speek amp measures 120 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Speek amp?

98 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Speek amp design files?

From the JBlitzar/speek repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Speek amp design in my own project?

Yes, under the terms of its GPL-3.0 license, which JBlitzar chose for the repository.

More boards in speek

Similar boards