5 open source boards using the TPA3116D2DAD
Real designs built with the TPA3116D2DAD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Speek amp
JBlitzar
120 × 80 mm98 parts2LGPL-3.01TPA3116D2-Class-D-Amplifier
Loredati-svg
93.5 × 52.8 mm69 parts2LNo license1STM32
Underwater-Communication
Frrrrrrrrrank
80 × 80 mm211 parts4LNo license0Class-D-Audio-Amplifier
Loredati-svg
93.5 × 52.8 mm69 parts2LNo license0STM32
Rnvm marge
jaromir-sukuba
151 × 131 mm215 parts2LNo license459
How designs wire the TPA3116D2DAD
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPA3116D2DAD connects to, and the resistors, capacitors and other passives placed on it.
- The SDZ_2 pin has a pull-up to VCC on 5 of 5 designs, most often 100 kΩ.
- The FAULTZ_3 pin has a pull-up to 24V on 5 of 5 designs, most often 100 kΩ (then 10 kΩ).
- The GAIN/SLV_8 pin has a resistor to GND on 5 of 5 designs, most often 20 kΩ (then 39 kΩ).
- The MUTE_12 pin has a resistor to GND on 5 of 5 designs, most often 100 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| MODSEL_1pin 1 | Connected to: GND 80% · a signal 20% | — |
| SDZ_2pin 2 | Connected to: Signal 100% |
|
| FAULTZ_3pin 3 | Connected to: Signal 100% |
|
| RINP_4pin 4 | Connected to: Signal 100% |
|
| RINN_5pin 5 | Connected to: Signal 100% |
|
| PLIMIT_6pin 6 | Connected to: Signal 100% |
|
| GVDD_7pin 7 | Connected to: Signal 100% |
|
| GAIN/SLV_8pin 8 | Connected to: Signal 100% |
|
| GND_9pin 9 | Connected to: GND 100% | — |
| LINP_10pin 10 | Connected to: Signal 80% · GND 20% |
|
| LINN_11pin 11 | Connected to: Signal 80% · GND 20% |
|
| MUTE_12pin 12 | Connected to: Signal 100% |
|
| AM2_13pin 13 | Connected to: GND 80% · a signal 20% | — |
| AM1_14pin 14 | Connected to: GND 80% · a signal 20% | — |
| AM0_15pin 15 | Connected to: GND 80% · a signal 20% | — |
| SYNC_16pin 16 | Connected to: Not connected 80% · a signal 20% | — |
| AVCC_17pin 17 | Connected to: 24V 100% |
|
| PVCC_18pin 18 | Connected to: VCC 100% |
|
| PVCC_19pin 19 | Connected to: VCC 100% |
|
| BSNL_20pin 20 | Connected to: Signal 100% |
|
| OUTNL_21pin 21 | Connected to: Signal 100% |
|
| GND_22pin 22 | Connected to: GND 100% | — |
| OUTPL_23pin 23 | Connected to: Signal 100% |
|
| BSPL_24pin 24 | Connected to: Signal 100% |
|
| GND_25pin 25 | Connected to: GND 100% | — |
| BSNR_26pin 26 | Connected to: Signal 80% · not connected 20% |
|
| OUTNR_27pin 27 | Connected to: Signal 80% · not connected 20% |
|
| GND_28pin 28 | Connected to: GND 100% | — |
| OUTPR_29pin 29 | Connected to: Signal 80% · not connected 20% |
|
| BSPR_30pin 30 | Connected to: Signal 80% · not connected 20% |
|
| PVCC_31pin 31 | Connected to: VCC 100% |
|
| PVCC_32pin 32 | Connected to: VCC 100% |
|
| GND_33pin 33 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rnvm marge by jaromir-sukuba, Speek amp by JBlitzar, TPA3116D2-Class-D-Amplifier by Loredati-svg and Underwater-Communication by Frrrrrrrrrank.
The TPA3116D2DAD in open source designs
The gallery holds 5 open source boards using the TPA3116D2DAD from 5 GitHub repositories; a typical one measures about 93.5 × 80 mm and carries around 98 components.
80% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Rnvm marge by jaromir-sukuba.
Parts used alongside the TPA3116D2DAD
Microcontrollers on boards using the TPA3116D2DAD
What boards using the TPA3116D2DAD are built for
TPA3116D2DAD: common questions
Where can I find a TPA3116D2DAD reference design?
Each of the 5 boards on this page is a real design using the TPA3116D2DAD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the TPA3116D2DAD SDZ_2 pin?
The SDZ_2 pin has a pull-up to VCC on 5 of 5 designs, most often 100 kΩ. Counted from the KiCad layouts of 5 open source designs using the TPA3116D2DAD.
What pull-up resistor is used on the TPA3116D2DAD FAULTZ_3 pin?
The FAULTZ_3 pin has a pull-up to 24V on 5 of 5 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 5 open source designs using the TPA3116D2DAD.
What resistor goes on the TPA3116D2DAD GAIN/SLV_8 pin?
The GAIN/SLV_8 pin has a resistor to GND on 5 of 5 designs, most often 20 kΩ (then 39 kΩ). Counted from the KiCad layouts of 5 open source designs using the TPA3116D2DAD.
Which microcontrollers do boards using the TPA3116D2DAD use?
Most are built on STM32 (2).
How big is a typical board using the TPA3116D2DAD?
The median is 93.5 × 80 mm, and 80% are two-layer designs.
What is the most popular open source board using the TPA3116D2DAD?
By GitHub stars, Rnvm marge by jaromir-sukuba, with 459 stars.
Can I simulate one of these boards using the TPA3116D2DAD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.