HardLabs

Invernadero-Portatil

JCircuitsoff·Invernadero-Portatil·KiCad/Invernadero Automatizado/Invernadero Automatizado.kicad_pcb

Invernadero-Portatil PCB layout, top view — open source ESP32 board by JCircuitsoff

About the Invernadero-Portatil PCB

Invernadero-Portatil is an open source ESP32 PCB design by JCircuitsoff, published on GitHub. It is a 2-layer board measuring 91 × 101 mm, with 14 components from 14 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the mh-cd42. By type, the board carries 11 connectors, 2 ICs and 1 battery holder.

From the project

Avances del proyecto final taller de ingeniería electrónica

IDE utilizado: Thonny Lenguaje de programacion: Micropython

Main components on the Invernadero-Portatil

mh-cd42ESP32-DEVKIT-V1

Invernadero-Portatil bill of materials (BOM)

14 components, 14 distinct parts.

QtyPartRefs
1
mh-cd42
U1
1
ESP32-DEVKIT-V1
U2
1
Sensor nivel de agua
J1
1
Sensor DHT11
J2
1
Modulo Buzzer
J3
1
Modulo LDR
J4
1
Modulo Rele LDR
J5
1
Modulo sensor fc28
J6
1
Barrel_Jack_Switch
J7
1
XL6009 INPUT
J8
1
XL6009 OUTPUT
J9
1
Ventilador DC
J10
1
Modulo Rele Humedad
J12
1
Battery
BT1

Invernadero-Portatil design files

The KiCad project lives in the JCircuitsoff/Invernadero-Portatil repository on GitHub; these links point at the commit this page was built from.

Invernadero-Portatil: common questions

What microcontroller does the Invernadero-Portatil use?

The Invernadero-Portatil is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the Invernadero-Portatil PCB?

The Invernadero-Portatil measures 91 × 101 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Invernadero-Portatil?

14 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the Invernadero-Portatil design files?

From the JCircuitsoff/Invernadero-Portatil repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Invernadero-Portatil design in my own project?

The repository has no license, so all rights stay with JCircuitsoff. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Invernadero-Portatil without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards