7 open source boards using the mh-cd42

Real designs built with the mh-cd42, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the mh-cd42

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the mh-cd42 connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT-5V pin is tied to 5V on 6 of 6 designs.
  • The BAT pin is tied to BATT on 4 of 6 designs (a signal on 2).
GNDpin 2, 3, 5Connected to: GND 94%
BATpin 4Connected to: BATT 67% · a signal 33%
OUT-5Vpin 6Connected to: 5V 100%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PCB 1 by Nigonzalezf, Bd pi by JavierGONL, Invernadero-Portatil by JCircuitsoff and Kicad by Lamorenobo.

The mh-cd42 in open source designs

The gallery holds 7 open source boards using the mh-cd42 from 6 GitHub repositories; a typical one measures about 91 × 100 mm and carries around 14 components.

100% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.

The most starred is PCB 1 by Nigonzalezf.

Parts used alongside the mh-cd42

Microcontrollers on boards using the mh-cd42

What boards using the mh-cd42 are built for

mh-cd42: common questions

Where can I find a mh-cd42 reference design?

Each of the 7 boards on this page is a real design using the mh-cd42. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the mh-cd42 OUT-5V pin connected?

The OUT-5V pin is tied to 5V on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the mh-cd42.

How is the mh-cd42 BAT pin connected?

The BAT pin is tied to BATT on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the mh-cd42.

Which microcontrollers do boards using the mh-cd42 use?

Most are built on ESP32 (6) and Raspberry Pi (1).

How big is a typical board using the mh-cd42?

The median is 91 × 100 mm, and 100% are two-layer designs.

What is the most popular open source board using the mh-cd42?

By GitHub stars, PCB 1 by Nigonzalezf, with 1 stars.

Can I simulate one of these boards using the mh-cd42 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part