11 open source boards using the TPS61222DCK
Real designs built with the TPS61222DCK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Wearable ECG ADS1293 nrf52840
NeDaMo93
24.4 × 35.6 mm41 parts4LNo license7Nordic nRF
Phoenix main board
Phalkon-Industries
91.9 × 53.2 mm107 parts4LCERN-OHL-S-2.02AVR/Arduino
Omamori
felixmark
25 × 35 mm34 parts2LNo license2ESP32
Null
jadenvv
40.5 × 80.2 mm121 parts4LNo license1Meshtastic node
benkyd
150 × 50 mm110 parts4LNo license1RP2040/RP2350
Flashlight power input dev
ahmadtak-3212
100 × 30 mm89 parts4LNo license0Contact-Monitor-Board
niwa-yamaguchi
100 × 100 mm80 parts2LCERN-OHL-P-2.00Watch
jeffc
41 × 23 mm42 parts2LNo license6RP2040/RP2350
PID Toaster
benkyd
119.8 × 126 mm105 parts2LNo license1Panel
jeffc
25.4 × 25.4 mm35 parts2LNo license6Watch power
jeffc
25.4 × 16.3 mm17 parts2LNo license6
How designs wire the TPS61222DCK
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TPS61222DCK connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 6 of 8 designs, most often 10 µF (then 1 µF).
- The VIN pin has a inductor on 5 of 8 designs, most often 4.7 µH.
- The VOUT pin has a decoupling capacitor on 5 of 8 designs, most often 10 µF (then 22 µF).
- The L pin has a inductor on 5 of 8 designs, most often 4.7 µH.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: VDD 88% |
|
| FBpin 2 | Connected to: 5V 63% · a signal 25% | — |
| GNDpin 3 | Connected to: GND 75% | — |
| VOUTpin 4 | Connected to: 5V 88% |
|
| Lpin 5 | Connected to: Signal 88% |
|
| ENpin 6 | Connected to: VDD 86% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Wearable ECG ADS1293 nrf52840 by NeDaMo93, Panel by jeffc, Omamori by felixmark and Phoenix main board by Phalkon-Industries.
The TPS61222DCK in open source designs
The gallery holds 11 open source boards using the TPS61222DCK from 8 GitHub repositories; a typical one measures about 41 × 35.6 mm and carries around 80 components.
55% are two-layer designs, the rest use four layers or more, and 18% carry an open source license.
The most starred is Wearable ECG ADS1293 nrf52840 by NeDaMo93.
Microcontrollers on boards using the TPS61222DCK
What boards using the TPS61222DCK are built for
TPS61222DCK: common questions
Where can I find a TPS61222DCK reference design?
Each of the 11 boards on this page is a real design using the TPS61222DCK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TPS61222DCK VIN pin?
The VIN pin has a decoupling capacitor on 6 of 8 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the TPS61222DCK.
What decoupling capacitors do designs use on the TPS61222DCK VOUT pin?
The VOUT pin has a decoupling capacitor on 5 of 8 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 8 open source designs using the TPS61222DCK.
How is the TPS61222DCK L pin connected?
The L pin has a inductor on 5 of 8 designs, most often 4.7 µH. Counted from the KiCad layouts of 8 open source designs using the TPS61222DCK.
Which microcontrollers do boards using the TPS61222DCK use?
Most are built on RP2040/RP2350 (2), AVR/Arduino (1), ESP32 (1) and Nordic nRF (1).
How big is a typical board using the TPS61222DCK?
The median is 41 × 35.6 mm, and 55% are two-layer designs.
What is the most popular open source board using the TPS61222DCK?
By GitHub stars, Wearable ECG ADS1293 nrf52840 by NeDaMo93, with 7 stars.
Can I simulate one of these boards using the TPS61222DCK before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.