Pixelrings dock
jfedor2·pixelrings·dock/kicad/pixelrings-dock.kicad_pcb
About the Pixelrings dock PCB
Pixelrings dock is an open source Microchip SAM PCB design by jfedor2, published on GitHub. It is a 2-layer board measuring 36 × 49 mm, with 25 components from 12 distinct parts.
Its main chip is the ATSAMD21E18A-M, from the Microchip SAM family. Other key parts include the MCP73831-2-OT. By type, the board carries 11 connectors, 5 resistors, 3 capacitors, 2 ICs, 2 diodes and 1 switch.
From the project
LED earrings programmable in Python
This repository contains designs and instructions to make LED earrings that are programmable in Python.
Each earring is a PCB with a SAMD21 chip and 12 individually addressable RGB LEDs. The diameter of the earring is 30mm and the weight is around 6 grams. To charge the batteries and program the earrings there's a dock that connects to your computer over USB.

Main components on the Pixelrings dock
Pixelrings dock bill of materials (BOM)
25 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATSAMD21E18A-M TLV75533PDBVR | SOT-23-5 | U1 |
| 1 | MCP73831-2-OT | SOT-23-5_rot | U2 |
| 11 | Conn_01x01_Pin | C5157437 | J2, J3, J4, J5, J6, J7, J8, J9 +3 |
| 1 | C963205 SW_Slide_DPDT | C963205 | SW1 |
| 1 | HRO-TYPE-C-31-M-12 | HRO-TYPE-C-31-M-12-Assembly | USB1 |
| 1 | WS2812B Orange | LED_0603_1608Metric | D1 |
| 1 | WS2812B Green | LED_0603_1608Metric | D2 |
| 2 | 1u | C_0402_1005Metric | C1, C2 |
| 1 | 10u | C_0402_1005Metric | C3 |
| 2 | 5.1k | R_0402_1005Metric | R1, R2 |
| 1 | 66.5k | R_0402_1005Metric | R3 |
| 2 | 1k | R_0402_1005Metric | R4, R5 |
Pixelrings dock design files
The KiCad project lives in the jfedor2/pixelrings repository on GitHub; these links point at the commit this page was built from.
Pixelrings dock: common questions
What microcontroller does the Pixelrings dock use?
The Pixelrings dock is built around the ATSAMD21E18A-M, from the Microchip SAM family.
How big is the Pixelrings dock PCB?
The Pixelrings dock measures 36 × 49 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pixelrings dock?
25 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pixelrings dock design files?
From the jfedor2/pixelrings repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pixelrings dock design in my own project?
The repository has no license, so all rights stay with jfedor2. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pixelrings dock without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in pixelrings
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416