M2RAM
JH-2108·M2RAM·PCB/M2RAM.kicad_pcb
About the M2RAM PCB
M2RAM is an open source PCB design by JH-2108, published on GitHub. It is a 4-layer board measuring 80 × 22 mm, with 16 components from 6 distinct parts.
Other key parts include the AS6C1008-55SIN and 74HC595. By type, the board carries 6 resistors, 5 capacitors, 4 ICs and 1 connector.
It belongs with the power & battery designs in this gallery.
From the project
A custom 128KB M.2 SRAM module built around asynchronous memory and a custom host interface.
The project uses an AS6C1008 asynchronous SRAM chip mounted on a custom M.2 PCB. It is designed to communicate with an external host controller through a compatible memory interface.
The project explores computer memory architecture, digital electronics, PCB designing and some parts of embedded programming.
The host controller communicates with the memory through its address, data and control signals.
Main components on the M2RAM
M2RAM bill of materials (BOM)
16 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AS6C1008-55SIN | SOP-32_11.305x20.495mm_P1.27mm | U1 |
| 3 | 74HC595 | SOIC-16_3.9x9.9mm_P1.27mm | U2, U3, U4 |
| 1 | Bus_M.2_Socket_M | M.2_2280-xx-M | J1 |
| 4 | 100nF | C_0603_1608Metric | C1, C2, C3, C4 |
| 1 | 10uF | C_0603_1608Metric | C5 |
| 6 | 10k | R_0603_1608Metric | R1, R2, R3, R4, R5, R6 |
M2RAM design files
The KiCad project lives in the JH-2108/M2RAM repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/M2RAM.kicad_pcb
- SchematicPCB/M2RAM.kicad_sch
M2RAM: common questions
How big is the M2RAM PCB?
The M2RAM measures 80 × 22 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the M2RAM?
16 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the M2RAM design files?
From the JH-2108/M2RAM repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the M2RAM design in my own project?
The repository has no license, so all rights stay with JH-2108. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k