2 open source boards using the AS6C1008-55SIN
Real designs built with the AS6C1008-55SIN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Floopy Drive
partlyhuman
96.3 × 76.3 mm31 parts2LMIT30M2RAM
JH-2108
80 × 22 mm16 parts4LNo license0
The AS6C1008-55SIN in open source designs
The gallery holds 2 open source boards using the AS6C1008-55SIN from 2 GitHub repositories; a typical one measures about 88.1 × 49.1 mm and carries around 24 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Floopy Drive by partlyhuman.
Microcontrollers on boards using the AS6C1008-55SIN
What boards using the AS6C1008-55SIN are built for
AS6C1008-55SIN: common questions
Where can I find a AS6C1008-55SIN reference design?
Each of the 2 boards on this page is a real design using the AS6C1008-55SIN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AS6C1008-55SIN use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the AS6C1008-55SIN?
The median is 88.1 × 49.1 mm, and 50% are two-layer designs.
What is the most popular open source board using the AS6C1008-55SIN?
By GitHub stars, Floopy Drive by partlyhuman, with 30 stars.
Can I simulate one of these boards using the AS6C1008-55SIN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.