MagSense
jinw06k·MagSense_PCB
About the MagSense PCB
MagSense is an open source ESP32 PCB design by jinw06k, published on GitHub. It is a 4-layer board measuring 36 × 150 mm, with 59 components from 22 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AP7361C-33E-13 and CD74HC154M96. By type, the board carries 29 capacitors, 8 resistors, 3 ICs, 3 diodes and 2 switches.
From the project
MagSense KiCad PCB project
Main components on the MagSense
MagSense bill of materials (BOM)
59 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U0 |
| 1 | AP7361C-33E-13 AP7361C-33ER-13 Diodes Incorporated | AP7361C-33ER-13 | U1 |
| 1 | CD74HC154M96 Texas Instruments | CD74HC154M96 | U2 |
| 1 | 2_54-1_4P BOOMELE(Boom Precision Elec) | 2_54-1_4P | H1 |
| 2 | 2_54_1X5 2_54_1x5 BOOMELE(Boom Precision Elec) | Header-Female-2_54_1x5 | H2, H3 |
| 10 | MMC5983MA MEMSIC | MMC5983MA | M_1, M_2, M_3, M_4, M_5, M_6, M_7, M_8 +2 |
| 1 | C116501 Reset | SW_SPST_PTS810 | SW1001 |
| 1 | C116501 Boot | SW_SPST_PTS810 | SW1002 |
| 1 | USB4155-03-C Global Connector Technology | USB4155-03-C | USB2 |
| 1 | C2986059 POWER Everlight Elec | 19-217_R6C-AL1M2VY_6T | D1 |
| 1 | C2986058 STATUS Everlight Elec | 19-217_R6C-AL1M2VY_6T | D2 |
| 1 | C2986060 ERROR Everlight Elec | 19-217_R6C-AL1M2VY_6T | D3 |
| 11 | 10UF 10uF | C_0805_2012Metric | C1, C3, C5, C7, C9, C11, C13, C15 +3 |
| 12 | 1UF 1uF | C_0603_1608Metric | C2, C4, C6, C8, C10, C12, C14, C16 +4 |
| 2 | 4.7UF 4.7uF | C_0805_2012Metric | C21, C23 |
| 1 | 0.1UF 0.1uF | C_0603_1608Metric | C25 |
| 1 | 100NF 100nF | C_0603_1608Metric | C31 |
| 2 | 47UF 47uF | C_1206_3216Metric | C32, C33 |
| 3 | 10K 10k | R_0603_1608Metric | R1, R2, R7 |
| 1 | 1k | R_0603_1608Metric | R3 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 470 | R_0603_1608Metric | R4, R5 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R10, R11 |
MagSense design files
The KiCad project lives in the jinw06k/MagSense_PCB repository on GitHub; these links point at the commit this page was built from.
- LayoutMagSense.kicad_pcb
- SchematicMagSense.kicad_sch
- BOMproduction/bom.csv
MagSense: common questions
What microcontroller does the MagSense use?
The MagSense is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the MagSense PCB?
The MagSense measures 36 × 150 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the MagSense?
59 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MagSense design files?
From the jinw06k/MagSense_PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MagSense design in my own project?
The repository has no license, so all rights stay with jinw06k. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MagSense without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k