HardLabs

PV Energy Monitoring using Microchip WLR089U0 (LoRaWAN)

jithinsisaac·LoRa-PV-RMS-SolarSurveil·PCB_WLR089U0_Board/LoRaPV_RMS_WLR089U0_Board.kicad_pcb

PV Energy Monitoring using Microchip WLR089U0 (LoRaWAN) PCB layout, top view — open source board by jithinsisaac

About the PV Energy Monitoring using Microchip WLR089U0 (LoRaWAN) PCB

PV Energy Monitoring using Microchip WLR089U0 (LoRaWAN) is an open source PCB design by jithinsisaac, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 68.1 × 70.7 mm, with 47 components from 30 distinct parts.

Other key parts include the WLR089U0-I_RM-SAMACSYS_PARTS, MCP73831, MCP1700-3302E_SOT23 and CH304E. By type, the board carries 15 resistors, 13 connectors, 7 capacitors, 5 diodes, 4 ICs and 1 transistor.

It belongs with the rf & radio and power & battery designs in this gallery.

From the project

IEEE SIGHT MTT-S funded project on Remote Energy Monitoring of Solar PV installations using LoRaWAN (Solar Surveil)

Student Team Members 1. Shreyas Kulkarni 2. Keith Barnes 3. Shreyas Kulkarni 4. Aparna Kulkarni

Faculty Team Members 1. Dr. Ashwini Kotrashetti 2. Tayyabali Sayyad 3. Gejo George 4. Freda Carvalho 5. Jithin Saji Isaac (Project Guide)

- All the source code required for PCB design, firmware development & web application development has been open sourced. Make maximum use of the same!

PV Energy Monitoring using Microchip WLR089U0 (LoRaWAN), from the project README
From the project README

Main components on the PV Energy Monitoring using Microchip WLR089U0 (LoRaWAN)

WLR089U0-I_RM-SAMACSYS_PARTSMCP73831MCP1700-3302E_SOT23CH304E

PV Energy Monitoring using Microchip WLR089U0 (LoRaWAN) bill of materials (BOM)

47 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
WLR089U0-I_RM-SAMACSYS_PARTS
WLR089U0-I_RM-SamacSys_Parts
IC1
1
MCP73831
U1
1
MCP1700-3302E_SOT23
U2
1
CH304E
U3
1
C10487
Q_PMOS_GSD
Q1
1
C319134
Barrel_Jack_Switch
J1
1
AUDIOJACK4
AudioJack4
J2
1
C395868
SHUNT
J3
7
CONN_01X02_MALE
Conn_01x02_Male
J4, J5, J7, J9, J10, J11, J12
1
USB_B_Micro
J6
1
SCREW_TERMINAL_01X02
Screw_Terminal_01x02
J8
1
CONN_ARM_JTAG_SWD_10
Conn_ARM_JTAG_SWD_10
J13
1
C265283
Battery_Cell
BT1
1
SW_Push
SW1
1
LED
D1
2
C8598
DIODE_SCHOTTKY
D2, D5
1
C2296
Red
D3
1
C2296
Green
D4
2
10UF
10uF
C1, C2
2
4.7UF
4.7uF
C3, C4
Show 10 more
QtyPartRefs
2
1UF
1uF
C5, C6
1
100N
100n
C7
1
18
R1
3
100K
100k
R2, R11, R14
1
6.8K
R3
4
470K
R4, R5, R6, R7
1
470
R8
2
10K
R9, R10
2
1k
R12, R13
1
22K
22k
R15

PV Energy Monitoring using Microchip WLR089U0 (LoRaWAN) design files

The KiCad project lives in the jithinsisaac/LoRa-PV-RMS-SolarSurveil repository on GitHub; these links point at the commit this page was built from.

PV Energy Monitoring using Microchip WLR089U0 (LoRaWAN): common questions

How big is the PV Energy Monitoring using Microchip WLR089U0 (LoRaWAN) PCB?

The PV Energy Monitoring using Microchip WLR089U0 (LoRaWAN) measures 68.1 × 70.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PV Energy Monitoring using Microchip WLR089U0 (LoRaWAN)?

47 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PV Energy Monitoring using Microchip WLR089U0 (LoRaWAN) design files?

From the jithinsisaac/LoRa-PV-RMS-SolarSurveil repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the PV Energy Monitoring using Microchip WLR089U0 (LoRaWAN) design in my own project?

Yes, under the terms of its GPL-3.0 license, which jithinsisaac chose for the repository.

More boards in LoRa-PV-RMS-SolarSurveil

Similar boards