Neurband main
jlcjak·neurband·.archive/neurband_main_revA/neurband_main.kicad_pcb
About the Neurband main PCB
Neurband main is an open source ESP32 PCB design by jlcjak, published on GitHub. It is a 4-layer board measuring 54 × 34 mm, with 52 components from 17 distinct parts.
Its main chip is the ESP32-S3-MINI-1-N8, from the ESP32 family. Other key parts include the ADS1298IPAGR, AP2112K-3.3TRG1 and LP5907MFX-3.0/NOPB. By type, the board carries 30 capacitors, 14 resistors, 5 ICs, 2 connectors and 1 switch.
It belongs with the iot & wireless and wearables designs in this gallery.
From the project
Open, minimal sEMG wristband like the Meta Neural Band: 8-ch ADS1298 + nRF52832 BLE, dry gold electrodes on a flex, 3D-printed band. KiCad, FreeCAD, Zephyr, Python, simulations.
The folder name starts with a dot so Backplane's project and part lists skip it; git and GitHub still show it.
Older work, kept for reference. Nothing here is current or ordered (every fab file here has "order": false).
Main components on the Neurband main
Neurband main bill of materials (BOM)
52 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-MINI-1-N8 | ESP32-S3-MINI-1-N8 | U1 |
| 2 | ADS1298IPAGR | TQFP-64_10x10mm_P0.5mm | U2, U3 |
| 1 | AP2112K-3.3TRG1 AP2112K-3.3 | SOT-23-5 | U4 |
| 1 | LP5907MFX-3.0/NOPB LP5907MFX-3.0 | SOT-23-5 | U5 |
| 1 | SM02B-SRSS-TB(LF)(SN) LiPo 3.7V protected | JST_SH_SM02B-SRSS-TB_1x02-1MP_P1.00mm_Horizontal | J1 |
| 1 | HC-FPC-05-09-40RLTAG FPC 40p 0.5mm (electrode flex) | HCTL_HC-FPC-05-09-40RLTAG_1x40-1MP_P0.50mm_Horizontal | J2 |
| 1 | TS-1088-AR02016 BOOT | SW_SPST_TS-1088-xR020 | SW1 |
| 9 | CL05B104KO5NNNC 100nF | C_0402_1005Metric | C1, C8, C15, C16, C18, C19, C21, C23 +1 |
| 3 | CL10A106KP8NNNC 10uF | C_0603_1608Metric | C2, C9, C25 |
| 14 | CL05A105KA5NQNC 1uF | C_0402_1005Metric | C3, C4, C5, C10, C11, C12, C14, C17 +6 |
| 2 | CL10A226MQ8NRNC 22uF | C_0603_1608Metric | C6, C13 |
| 1 | CC0402KRX7R9BB152 1.5nF | C_0402_1005Metric | C7 |
| 1 | CL10A475KO8NNNC 4.7uF | C_0603_1608Metric | C27 |
| 1 | 0402WGF1004TCE 1M | R_0402_1005Metric | R1 |
| 1 | 0402WGF1003TCE 100k | R_0402_1005Metric | R2 |
| 4 | 0402WGF1002TCE 10k | R_0402_1005Metric | R3, R4, R5, R6 |
| 8 | 4D03WGJ0472T5E 4.7k | R_Array_Convex_4x0603 | RN1, RN2, RN3, RN4, RN5, RN6, RN7, RN8 |
Neurband main design files
The KiCad project lives in the jlcjak/neurband repository on GitHub; these links point at the commit this page was built from.
Neurband main: common questions
What microcontroller does the Neurband main use?
The Neurband main is built around the ESP32-S3-MINI-1-N8, from the ESP32 family.
How big is the Neurband main PCB?
The Neurband main measures 54 × 34 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Neurband main?
52 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Neurband main design files?
From the jlcjak/neurband repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Neurband main design in my own project?
The repository has no license, so all rights stay with jlcjak. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Neurband main without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in neurband
Nordic nRF
Neurband c
jlcjak
28.7 × 27 mm61 parts4LNo license32Neurband electrodes XL
jlcjak
196 × 50 mm49 parts2LNo license32Neurband electrodes L
jlcjak
172 × 50 mm49 parts2LNo license32Neurband electrodes
jlcjak
152.5 × 50 mm49 parts2LNo license32Neurband electrodes S
jlcjak
139 × 50 mm49 parts2LNo license32
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k