Neurband c

jlcjak·neurband·boards/neurband_c/neurband_c.kicad_pcb

Neurband c PCB layout, top view — open source Nordic nRF board by jlcjak

About the Neurband c PCB

Neurband c is an open source Nordic nRF PCB design by jlcjak, published on GitHub. It is a 4-layer board measuring 28.7 × 27 mm, with 61 components from 26 distinct parts.

Its main chip is the NRF52832-QFAA-R, from the Nordic nRF family. Other key parts include the ADS1298IPAGR, XC6206P332MR-G, TP4054-42-SOT25R and LSM6DSLTR. By type, the board carries 34 capacitors, 17 resistors, 5 ICs, 1 crystal, 1 connector and 1 switch.

It belongs with the iot & wireless and wearables designs in this gallery.

From the project

Open, minimal sEMG wristband like the Meta Neural Band: 8-ch ADS1298 + nRF52832 BLE, dry gold electrodes on a flex, 3D-printed band. KiCad, FreeCAD, Zephyr, Python, simulations.

Layout notes: docs/layout/mainclayout.md. The scripts used while laying it out are in .archive/neurbandclayout_scripts.

Main components on the Neurband c

Neurband c bill of materials (BOM)

61 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NRF52832-QFAA-R
nRF52832-QFAA
U1
1
ADS1298IPAGR
U2
1
XC6206P332MR-G
XC6206P332MR
U3
1
TP4054-42-SOT25R
TP4054
U4
1
LSM6DSLTR
LSM6DSL
U5
1
X201632MKB4SI
32MHz 8pF
Y1
1
FPC-05F-20PH20
FPC 20p 0.5mm (electrode flex)
J1
1
TS-1088-AR02016
WAKE / MARK
SW1
1
KT-0603R
red
D1
1
SDCL1005C3N9STDF
3.9nH
L1
10
CL05B104KO5NNNC
100nF
C1, C8, C9, C11, C13, C17, C18, C29 +2
11
CL05A105KA5NQNC
1uF
C2, C3, C4, C7, C10, C15, C24, C26 +3
1
CL10A226MQ8NRNC
22uF
C5
4
CL10A106KP8NNNC
10uF
C6, C16, C25, C28
1
0402B472K500NT
4.7nF
C12
1
0402CG101J500NT
100pF
C14
3
0402CG120J500NT
12pF
C19, C20, C34
1
0402CG0R8B500NT
0.8pF
C21
2
DNP
C22, C23
5
0402WGF1004TCE
1M
R1, R6, R7, R12, R13
Show 6 more
QtyPartRefs
2
0402WGF1003TCE
100k
R2, R11
1
0402WGF0000TCE
0
R3
3
0402WGF1002TCE
10k
R4, R9, R10
1
0402WGF100JTCE
10
R5
1
0402WGF1001TCE
1k
R8
4
4D03WGJ0103T5E
10k
RN1, RN2, RN3, RN4

Neurband c design files

The KiCad project lives in the jlcjak/neurband repository on GitHub; these links point at the commit this page was built from.

Neurband c: common questions

What microcontroller does the Neurband c use?

The Neurband c is built around the NRF52832-QFAA-R, from the Nordic nRF family.

How big is the Neurband c PCB?

The Neurband c measures 28.7 × 27 mm, has 4 copper layers and is 1 mm thick.

How many components are on the Neurband c?

61 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Neurband c design files?

From the jlcjak/neurband repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Neurband c design in my own project?

The repository has no license, so all rights stay with jlcjak. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Neurband c without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in neurband

Similar boards