STM32 FlightController

JLjoestar23·STM32_FlightController·STM32_FlightController_Rev2/STM32_FlightController.kicad_pcb

STM32 FlightController PCB layout, top view — open source STM32 board by JLjoestar23

About the STM32 FlightController PCB

STM32 FlightController is an open source STM32 PCB design by JLjoestar23, published on GitHub. It is a 4-layer board measuring 42 × 44.4 mm, with 52 components from 30 distinct parts.

Its main chip is the STM32F405RGTX, from the STM32 family. Other key parts include the SN74LVC1T45DBV, ICM-20948, USBLC6-2SC6, AMS1117-3.3 and TLV70018. By type, the board carries 23 capacitors, 10 resistors, 8 ICs, 5 connectors, 2 switches and 2 diodes.

It belongs with the robotics & motion designs in this gallery.

From the project

PCB, software, firmware, and other files related to a custom made STM32-based flight controller.

Main components on the STM32 FlightController

STM32 FlightController bill of materials (BOM)

52 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
SN74LVC1T45DBV
U1, U8
1
ICM-20948
U2
1
STM32F405RGTX
STM32F405RGTx
U3
1
USBLC6-2SC6
U4
1
AMS1117-3.3
U5
1
TLV70018
U6
1
BMP390L
U7
1
X32258MOB4SI
Y1
1
6.29105E+11
629105150521
J1
1
JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_Horizontal
J2
2
JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal
J3, J4
1
ZX-PZ1.27-2-5PZZ
Conn_02x05_Odd_Even
J5
1
PTS815SJM250SMTRLFS
SW1
1
PCM12SMTR
SW2
1
PMEG2005CT,215
D1
1
RED
D2
1
BLM18PG121SN1D
120R @ 100MHz
FB1
1
4U7
4u7
C1
11
100N
100n
C2, C3, C4, C5, C6, C10, C11, C12 +3
1
10N
10n
C7
Show 10 more
QtyPartRefs
2
1u
C8, C9
2
2U2
2u2
C13, C14
1
100N
100n
C17
1
1u
C18
2
22U
22u
C19, C20
2
14P
14p
C21, C22
2
3K3
3k3
R1, R6
4
2K7
2k7
R2, R3, R4, R7
3
10K
10k
R5, R8, R10
1
1K5
1.5k
R9

STM32 FlightController design files

The KiCad project lives in the JLjoestar23/STM32_FlightController repository on GitHub; these links point at the commit this page was built from.

STM32 FlightController: common questions

What microcontroller does the STM32 FlightController use?

The STM32 FlightController is built around the STM32F405RGTX, from the STM32 family.

How big is the STM32 FlightController PCB?

The STM32 FlightController measures 42 × 44.4 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the STM32 FlightController?

52 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32 FlightController design files?

From the JLjoestar23/STM32_FlightController repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32 FlightController design in my own project?

The repository has no license, so all rights stay with JLjoestar23. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32 FlightController without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards