39 open source boards using the SN74LVC1T45DBV
Real designs built with the SN74LVC1T45DBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Faultycat
ElectronicCats
51.2 × 124.2 mm94 parts2LBSD-3-Clause183Zs1100a
zscircuits
129 × 104.6 mm486 partsNo license76Raspberry Pi
Bmacro Base V2
KipJM
182.6 × 130.9 mm133 parts2LCERN-OHL-W-2.027ESP32
Blinky badge light
rowr111
108.6 × 87.8 mm105 parts4LMIT9Pmod level conv-2
TomKeddie
83 × 22.9 mm68 parts4LMIT7Lichtenprog
cr1tbit
28 × 28 mm69 parts4LCERN-OHL-P-2.02Comp75
benzooku
304.9 × 120.7 mm373 parts2LGPL-3.01STM32
1 2og repro
zhol0777
347.1 × 119.3 mm116 parts2LNo license1RP2040/RP2350
Panel
da-penguin-guy
100.1 × 121.4 mm84 parts2LNo license1ESP32
Espac
metehus
95 × 95 mm62 parts2LNo license1STM32
STM32 FlightController
JLjoestar23
42 × 44.4 mm52 parts4LNo license1STM32
ETH1CLCR2
BehrensG
160 × 100 mm591 parts6LNo license0RP2040/RP2350
Aniboard
cheyao
355 × 120 mm384 parts2LZlib0PRODIGY-MOTHERBOARD
mark69163
160 × 120 mm333 parts4LNo license0Eurobot 2025 carte mere
Les-opossums
87 × 85 mm306 parts4LNo license0Nordic nRF
CLABSI
Nick-Trigger
56.5 × 57 mm151 parts6LNo license0ESP32
Mega2560plus
sneakylizard123-4
53.3 × 101.6 mm138 parts4LNo license0Microchip SAM
Motherboard
MuddJTS
141.5 × 53.8 mm134 parts4LNo license0ESP32
ELE MB A1
Les-opossums
80 × 56 mm131 parts4LNo license0ESP32
BitcoinMiner
sneakylizard123-4
75 × 100 mm116 parts4LNo license0RP2040/RP2350
LFX FC R2
nguyencanhanh
50 × 50 mm113 parts4LMIT0Raspberry Pi
Laser nephelometer
sai-ydev
56.6 × 57.7 mm103 parts2LGPL-3.00RP2040/RP2350
Dragonfly v0 1
aravindjayan
40 × 59.2 mm76 parts2LNo license0ESP32
Controlexp
Simonhajd
98.7 × 59.6 mm36 parts2LNo license0STM32
X-2: Lumberjack-Arm, HotSwap RGB
rgoulter
285 × 94.2 mm268 parts2LNo license230ESP32
Led button
GeniePod
90 × 90 mm116 parts2LCERN-OHL-S-2.02Nordic nRF
V1 0 0
Nick-Trigger
56.5 × 57 mm151 parts6LNo license0ESP32
.Mega2560plus.spinrender src
sneakylizard123-4
53.3 × 101.6 mm137 parts6LNo license0ESP32
.bitcoinMiner.spinrender src
sneakylizard123-4
75 × 100 mm116 parts4LNo license0RP2040/RP2350
Dragonfly v0-1 Ribs
aravindjayan
52 × 71.2 mm76 parts2LNo license0LFX LTE R1
nguyencanhanh
46 × 46 mm67 parts4LMIT0Zmod
hdlguy
50 × 70 mm20 parts4LMIT3PIC
FOXSI-4 Formatter/Plenum board
foxsi
116.8 × 59.7 mm133 parts4LNo license1RP2040/RP2350
Pump board
TrendBit
90 × 100 mm181 parts4LGPL-3.00ESP32
.Mega2560plus.spinrender tmp
sneakylizard123-4
53.3 × 101.6 mm137 parts6LNo license0ESP32
.bitcoinMiner.spinrender tmp
sneakylizard123-4
75 × 100 mm116 parts4LNo license0
How designs wire the SN74LVC1T45DBV
Read from the KiCad layouts of 28 open source designs, one per repository: what each pin of the SN74LVC1T45DBV connects to, and the resistors, capacitors and other passives placed on it.
- The VCCB pin has a decoupling capacitor on 15 of 28 designs, most often 100 nF (then 10 µF).
- The VCCA pin has a decoupling capacitor on 13 of 28 designs, most often 100 nF (then 22 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCApin 1 | Connected to: 3.3V 93% |
|
| GNDpin 2 | Connected to: GND 93% | — |
| VCCBpin 6 | Connected to: 5V 82% · a signal 18% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include X-1: MiniF4-36: Reversible Split Keyboard by rgoulter, Faultycat by ElectronicCats, Zs1100a by zscircuits and Bmacro Base V2 by KipJM.
The SN74LVC1T45DBV in open source designs
The gallery holds 39 open source boards using the SN74LVC1T45DBV from 29 GitHub repositories; a typical one measures about 83 × 94.2 mm and carries around 116 components.
58% use four copper layers or more, and 33% carry an open source license.
The most starred is X-2: Lumberjack-Arm, HotSwap RGB by rgoulter.
Parts used alongside the SN74LVC1T45DBV
Microcontrollers on boards using the SN74LVC1T45DBV
What boards using the SN74LVC1T45DBV are built for
SN74LVC1T45DBV: common questions
Where can I find a SN74LVC1T45DBV reference design?
Each of the 39 boards on this page is a real design using the SN74LVC1T45DBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC1T45DBV VCCB pin?
The VCCB pin has a decoupling capacitor on 15 of 28 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 28 open source designs using the SN74LVC1T45DBV.
What decoupling capacitors do designs use on the SN74LVC1T45DBV VCCA pin?
The VCCA pin has a decoupling capacitor on 13 of 28 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 28 open source designs using the SN74LVC1T45DBV.
What parts are used alongside the SN74LVC1T45DBV?
The USBLC6-2SC6, AMS1117-3.3, AP2112K-3.3, ESP32-S3-WROOM-1 and RP2040 appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC1T45DBV use?
Most are built on ESP32 (11), RP2040/RP2350 (8), STM32 (6) and Raspberry Pi (2).
How big is a typical board using the SN74LVC1T45DBV?
The median is 83 × 94.2 mm, and 42% are two-layer designs.
What is the most popular open source board using the SN74LVC1T45DBV?
By GitHub stars, X-2: Lumberjack-Arm, HotSwap RGB by rgoulter, with 230 stars.
Can I simulate one of these boards using the SN74LVC1T45DBV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.