BB-8 Head Control Board
jmattingley23·bb8·PCB/head_control_board/head_control_board.kicad_pcb
About the BB-8 Head Control Board
BB-8 Head Control Board is an open source ESP32 PCB design by jmattingley23, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 104.4 × 72.5 mm, with 48 components from 21 distinct parts.
Its main chip is the ESP32-S3-WROOM-1(N16R8), from the ESP32 family. Other key parts include the TPS63070RNMR and SN74AHCT245PWR. By type, the board carries 22 capacitors, 14 resistors, 4 ICs, 3 diodes, 2 inductors and 1 transistor.
It belongs with the robotics & motion designs in this gallery.
From the project
full size sci-fi ball robot

Main components on the BB-8 Head Control Board
BB-8 Head Control Board bill of materials (BOM)
48 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TPS63070RNMR | VQFN-HR-15_L3.0-W2.5-P0.50-BL_TPS63070RNMR | U1, U2 |
| 1 | SN74AHCT245PWR | TSSOP-20_L6.5-W4.4-P0.65-LS6.4-BL | U3 |
| 1 | ESP32-S3-WROOM-1(N16R8) | WIRELM-SMD_ESP32-S3-WROOM-1 | U4 |
| 1 | AO3401A | SOT-23_L2.9-W1.3-P1.90-LS2.4-BR | Q1 |
| 1 | TYPE-C 16PIN 2MD(073) | USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB1 |
| 1 | WS2812B-MINI | LED-SMD_4P-L3.5-W3.5-TL_WS2812B | LED1 |
| 2 | D | SMA_L4.3-W2.6-LS5.2-RD | D1, D3 |
| 1 | IP4234CZ6 | SOT-457_L2.9-W1.5-P0.95-LS2.8-BL | D2 |
| 2 | 1.5uH | IND-SMD_L7.0-W6.6 | L1, L2 |
| 4 | 10uF 0805 | C_0805_2012Metric | C1, C2, C3, C4 |
| 4 | 10uF 0603 | C_0603_1608Metric | C5, C6, C7, C8 |
| 7 | 100nF | C_0402_1005Metric | C9, C10, C17, C19, C20, C21, C22 |
| 6 | 22uF 0805 | C_0805_2012Metric | C11, C12, C13, C14, C15, C16 |
| 1 | 10uF | C_0805_2012Metric | C18 |
| 5 | 10k | R_0402_1005Metric | R1, R3, R4, R12, R14 |
| 3 | 100k | R_0402_1005Metric | R5, R10, R11 |
| 1 | 680k | R_0603_1608Metric | R6 |
| 1 | 470k | R_0603_1608Metric | R7 |
| 1 | 130k | R_0603_1608Metric | R8 |
| 1 | 150k | R_0603_1608Metric | R9 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 5.1k | R_0805_2012Metric | R15, R16 |
BB-8 Head Control Board design files
The KiCad project lives in the jmattingley23/bb8 repository on GitHub; these links point at the commit this page was built from.
BB-8 Head Control Board: common questions
What microcontroller does the BB-8 Head Control Board use?
The BB-8 Head Control Board is built around the ESP32-S3-WROOM-1(N16R8), from the ESP32 family.
How big is the BB-8 Head Control Board?
The BB-8 Head Control Board measures 104.4 × 72.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BB-8 Head Control Board?
48 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the BB-8 Head Control Board design files?
From the jmattingley23/bb8 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BB-8 Head Control Board design in my own project?
Yes, under the terms of its GPL-3.0 license, which jmattingley23 chose for the repository.
Can I test firmware for the BB-8 Head Control Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in bb8
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k