LedControl
Jochen0x90h·LedControl·pcb/g431Triple/control.kicad_pcb
About the LedControl PCB
LedControl is an open source STM32 PCB design by Jochen0x90h, published on GitHub under the MIT license. It is a 2-layer board measuring 64 × 39.5 mm, with 48 components from 22 distinct parts.
Its main chip is the STM32G431CBUx, from the STM32 family. Other key parts include the TPS82130, BME680 and SP3485CN. By type, the board carries 19 resistors, 15 capacitors, 6 ICs, 3 connectors, 3 diodes and 1 crystal.
It belongs with the displays & leds designs in this gallery.
From the project
Controller for LED strips based on WS2812 with display based on SSD1306
Main components on the LedControl
LedControl bill of materials (BOM)
48 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G431CBUx | STM32-UFQFPN48 | U1 |
| 1 | TPS82130 | TPS82130 | U2 |
| 1 | BME680 | BME680 | U3 |
| 3 | SP3485CN | SO-8 | U4, U5, U6 |
| 1 | O24.000000-JSO21C1LC-D-3.3-T3-N-0 | JSO21 | X1 |
| 1 | TYPE-C 16PIN 2MD(073) | TYPE-C-16PIN-2MD-073 | J1 |
| 1 | FTSH-107-01-L-DV-K | PinHeader-2x7-1.27mm-smd | P1 |
| 1 | AFC07-S24FCC-00 | Connector-Flat-24-0.5mm | P3 |
| 1 | IM69D120 | Infineon_PG-LLGA-5-1 | MK1 |
| 3 | PMEG6010ELR | PMEG6010ELR | D4, D5, D6 |
| 2 | 10u/16V | 1206 | C1, C3 |
| 1 | 22u/6V3 | 0805 | C2 |
| 11 | 100n | 0603 | C4, C5, C10, C11, C12, C13, C14, C15 +3 |
| 1 | 1u | 0603 | C6 |
| 4 | 33k | 0603 | R1, R6, R8, R10 |
| 2 | 10k | 0603 | R2, R3 |
| 1 | 900k | 0603 | R4 |
| 3 | 120k | 0603 | R5, R7, R9 |
| 6 | 120R | 1206-term | R11, R12, R13, R14, R15, R16 |
| 1 | 1k | 0603 | R17 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 470R | 0603 | R18 |
| 1 | 330R | 0603 | R19 |
LedControl design files
The KiCad project lives in the Jochen0x90h/LedControl repository on GitHub; these links point at the commit this page was built from.
LedControl: common questions
What microcontroller does the LedControl use?
The LedControl is built around the STM32G431CBUx, from the STM32 family.
How big is the LedControl PCB?
The LedControl measures 64 × 39.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LedControl?
48 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the LedControl design files?
From the Jochen0x90h/LedControl repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LedControl design in my own project?
Yes, under the terms of its MIT license, which Jochen0x90h chose for the repository.
Can I test firmware for the LedControl without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k