Amiga-1000-Rejuvenator
joethezombie·Amiga-1000-Rejuvenator·KiCAD/Amiga-Rejuvenator/Amiga-Rejuvenator.kicad_pcb
About the Amiga-1000-Rejuvenator PCB
Amiga-1000-Rejuvenator is an open source PCB design by joethezombie, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 241.8 × 174.8 mm, with 120 components from 56 distinct parts.
Other key parts include the 74LS245, 74LS393-U2, 74F257, 74LS244-U16,U17 and 74LS373. By type, the board carries 44 ICs, 38 capacitors, 14 resistors, 6 crystals, 5 connectors and 5 jumpers.
It belongs with the retro computing designs in this gallery.
From the project
A1000 Rejuvenator
Amiga 1000 Rejuvenator Re-creation Project -------------------------------------------------------------------------------------------
Any projects, additions, alterations, derivatives, or improvements based on this Amiga-1000-Rejuvenator project must be openly shared, including software or PLD coding. Additionally, on top of the LICENSE specified, the amigalove.com logo and Greg Tibbs name must always be present in digital releases, and prominently printed on physical productions.
Main components on the Amiga-1000-Rejuvenator
Amiga-1000-Rejuvenator bill of materials (BOM)
120 components, 56 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 74LS245 | DIP-20_W7.62mm | U1, U21, U22 |
| 1 | 74LS393-U2 | DIP-14_W7.62mm | U2 |
| 2 | 74F257 | DIP-16_W7.62mm | U3, U35 |
| 4 | 74LS244-U16,U17 | DIP-20_W7.62mm | U4, U14, U16, U17 |
| 2 | 74LS373 | DIP-20_W7.62mm | U5, U15 |
| 8 | V53C104 | DIP-20_W7.62mm | U6, U7, U8, U9, U10, U11, U12, U13 |
| 1 | 512K-ROM | DIP-40_W15.24mm | U18 |
| 1 | 8372-FatAgnus | PLCC-84_THT-Socket | U19 |
| 1 | 8361-Agnus-Socket | DIP-48_W15.24mm_Socket | U19B1 |
| 1 | 8364-Paula | DIP-48_W15.24mm_Socket | U20 |
| 1 | 8364-Paula-Socket | 48pin_blank_socket | U20B1 |
| 2 | RP | DIP-16_W7.62mm | U23, U24 |
| 1 | 8362-Denise | DIP-48_W15.24mm_Socket | U25 |
| 1 | 8362-Denise-Socket | 48pin_blank_socket | U25B1 |
| 2 | 74HC245 | DIP-20_W7.62mm | U26, U34 |
| 1 | OKI6242B | DIP-18_W7.62mm | U27 |
| 2 | PAL16L8 | DIP-20_W7.62mm | U28, U29 |
| 2 | PAL20L8 | DIP-24_W7.62mm | U30, U31 |
| 1 | 74LS74 | DIP-14_W7.62mm | U32 |
| 1 | 74LS04 | DIP-14_W7.62mm | U33 |
Show 36 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PALCAS | MOLEX_4455-10_W7.62mm[x2-R] | U36 |
| 1 | PALEN | MOLEX_4455-10_W7.62mm[x2-R] | U37 |
| 1 | U3I | MOLEX_4455-10_W7.62mm[x2] | U38 |
| 1 | U3G | MOLEX_4455-10_W7.62mm[x2] | U39 |
| 1 | U2J | MOLEX_4455-8_W7.62mm[x2] | U40 |
| 1 | U2I | MOLEX_4455-8_W7.62mm[x2] | U41 |
| 1 | X1 | MOLEX_4455-2_W7.62mm | X1 |
| 1 | X14 | MOLEX_4455-4_W7.62mm | X14 |
| 1 | X15 | MOLEX_4455-6_W7.62mm | X15 |
| 1 | VideoSlot 1 | PinHeader_2x18_P2.54mm_Vertical | X16 |
| 1 | VideoSlot 2 | PinHeader_2x18_P2.54mm_Vertical | X17 |
| 1 | Crystal | Crystal_AT310_D3.0mm_L10.0mm_Vertical | Y1 |
| 2 | GND | PinHeader_1x01_P2.54mm_Vertical | J1, J18 |
| 1 | 28M | PinHeader_1x01_P2.54mm_Vertical | J15 |
| 1 | RMBCLKS | PinHeader_1x01_P2.54mm_Vertical | J17 |
| 1 | +12X | PinHeader_1x01_P2.54mm_Vertical | J19 |
| 1 | 3.6V_Varta | 3.6V Varta | BT1 |
| 2 | 1N914 | D_DO-35_SOD27_P12.70mm_Horizontal | CR1, CR2 |
| 1 | KICKSTART ENABLE | PinHeader_1x02_P2.54mm_Horizontal | JP100 |
| 1 | MEM_CONFIG | PinHeader_1x02_P2.54mm_Vertical | JP101 |
| 1 | JUMPERS | PinHeader_1x02_P2.54mm_Vertical | JP102 |
| 1 | 2MEG_AGNUS | PinHeader_1x02_P2.54mm_Vertical | JP103 |
| 1 | PAL/NTSC | PinHeader_1x02_P2.54mm_Vertical | JP104 |
| 5 | RP | R_Array_SIP10 | RP1, RP2, RP3, RP4, RP5 |
| 31 | .1uF | C_Rect_L7.0mm_W2.0mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8 +23 |
| 3 | 22uF | C_Rect_L7.0mm_W2.0mm_P5.00mm | C20, C32, C37 |
| 2 | 10uF | C_Rect_L7.0mm_W2.0mm_P5.00mm | C21, C30 |
| 1 | 47uF | C_Rect_L7.0mm_W2.0mm_P5.00mm | C23 |
| 1 | VAR.C | variable_capacitor | C24 |
| 1 | 47 | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R1 |
| 2 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R2, R3 |
| 2 | 3.3K | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R4, R5 |
| 2 | 33 | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R6, R7 |
| 2 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R8, R13 |
| 4 | 33 | R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R9, R10, R11, R12 |
| 1 | 4.7K | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R14 |
Amiga-1000-Rejuvenator design files
The KiCad project lives in the joethezombie/Amiga-1000-Rejuvenator repository on GitHub; these links point at the commit this page was built from.
Amiga-1000-Rejuvenator: common questions
How big is the Amiga-1000-Rejuvenator PCB?
The Amiga-1000-Rejuvenator measures 241.8 × 174.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Amiga-1000-Rejuvenator?
120 components, from 56 distinct parts. The full bill of materials is listed on this page.
Where can I download the Amiga-1000-Rejuvenator design files?
From the joethezombie/Amiga-1000-Rejuvenator repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Amiga-1000-Rejuvenator design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which joethezombie chose for the repository.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k