5 open source boards using the PAL20L8

Real designs built with the PAL20L8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The PAL20L8 in open source designs

The gallery holds 5 open source boards using the PAL20L8 from 4 GitHub repositories; a typical one measures about 193.9 × 168.1 mm and carries around 66 components.

60% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is Amiga-1000-Rejuvenator by joethezombie.

Parts used alongside the PAL20L8

What boards using the PAL20L8 are built for

PAL20L8: common questions

Where can I find a PAL20L8 reference design?

Each of the 5 boards on this page is a real design using the PAL20L8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the PAL20L8?

The 74HC245, 74LS245 and PAL16L8 appear in the most repositories here.

How big is a typical board using the PAL20L8?

The median is 193.9 × 168.1 mm, and 60% are two-layer designs.

What is the most popular open source board using the PAL20L8?

By GitHub stars, Amiga-1000-Rejuvenator by joethezombie, with 57 stars.

Can I simulate one of these boards using the PAL20L8 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part