14 open source boards using the PAL16L8
Real designs built with the PAL16L8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Amiga-1000-Rejuvenator
joethezombie
241.8 × 174.8 mm120 parts4LCERN-OHL-S-2.057Sun3 60
54weasels
231.1 × 340.4 mm225 parts4LNo license34CompaqportableIII
raymondh2
194 × 170.6 mm123 parts2LNo license17Memotron
inmbolmie
104.9 × 81.8 mm44 parts2LGPL-3.04Chameleon schematics
Seequa-Computer-Preservation
435 × 317.5 mm361 parts2LNo license3Ns32k timewarp
drelectro
203.2 × 218.4 mm409 parts4LMIT1Lomax ColorMagic Redux
RichCini
254 × 137.7 mm148 parts4LNo license1Proto1
ehbc-project
254 × 254 mm166 parts4LNo license0- schematic only · 164 parts
Xl-7-repro
computerguy096
164 partsGPL-3.00 Sun3 60 layout2 routing2
54weasels
231.1 × 340.4 mm225 parts4LNo license34Lomax Thunder 186 Redux
RichCini
253.6 × 137.7 mm116 parts4LNo license1AVR/Arduino
M68k hbc
ehbc-project
304.8 × 243.8 mm72 parts6LNo license0GIMIX 256k SRAM
roberto314
247.7 × 140.3 mm104 parts2LBSD-2-Clause1GIMIX intelligent 3 port Serial
roberto314
149.9 × 139.7 mm69 parts2LBSD-2-Clause1
How designs wire the PAL16L8
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the PAL16L8 connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 89% | — |
| VCCpin 20 | Connected to: 5V 89% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Amiga-1000-Rejuvenator by joethezombie, Sun3 60 by 54weasels, CompaqportableIII by raymondh2 and Memotron by inmbolmie.
The PAL16L8 in open source designs
The gallery holds 14 open source boards using the PAL16L8 from 10 GitHub repositories; a typical one measures about 241.8 × 174.8 mm and carries around 136 components.
62% use four copper layers or more, and 43% carry an open source license.
The most starred is Amiga-1000-Rejuvenator by joethezombie.
Parts used alongside the PAL16L8
Microcontrollers on boards using the PAL16L8
What boards using the PAL16L8 are built for
PAL16L8: common questions
Where can I find a PAL16L8 reference design?
Each of the 14 boards on this page is a real design using the PAL16L8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the PAL16L8?
The 74LS245, 74LS04, 74LS138, 74LS244 and 74LS74 appear in the most repositories here.
Which microcontrollers do boards using the PAL16L8 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the PAL16L8?
The median is 241.8 × 174.8 mm, and 38% are two-layer designs.
What is the most popular open source board using the PAL16L8?
By GitHub stars, Amiga-1000-Rejuvenator by joethezombie, with 57 stars.
Can I simulate one of these boards using the PAL16L8 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.