Ipad-Huelle
Jolomolokolo·Ipad-Huelle
About the Ipad-Huelle PCB
Ipad-Huelle is an open source PCB design by Jolomolokolo, published on GitHub. It is a 2-layer board measuring 40.7 × 74.6 mm, with 48 components from 30 distinct parts.
Other key parts include the RTS5306E-GR, TPS61253AYFFR, DW01A and TP4056-42-ESOP8. By type, the board carries 18 capacitors, 16 resistors, 4 ICs, 4 connectors, 2 diodes and 1 transistor.
It belongs with the power & battery designs in this gallery.
From the project
Adding storage and power to the Ipad
This project is a compact USB-C microSD card reader based on the Realtek RTS5306E-GR controller. The device supports reading microSD cards while simultaneously powering and charging a connected device such as an iPad.
- USB 2.0 microSD card reader - USB-C output for data and power - USB-C charging input - Internal battery / powerbank support
- RTS5306E-GR USB card reader controller - USB 2.0 interface - microSD card support - USB-C charging input - USB-C output with power + data - Internal 3.3V regulation - Compact PCB design
Main components on the Ipad-Huelle
Ipad-Huelle bill of materials (BOM)
48 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RTS5306E-GR | QFN50P500X500X90-33N | IC1 |
| 1 | TPS61253AYFFR | BGA9C40P3X3_119X129X62 | IC2 |
| 1 | DW01A | SOT-23-6 | U4 |
| 1 | TP4056-42-ESOP8 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U5 |
| 1 | FS8205A | SOP65P640X120-8N | Q2 |
| 1 | Crystal | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Micro_SD_Card | microSD_HC_Molex_104031-0811 | J1 |
| 1 | Conn_01x02_Pin | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J4 |
| 1 | USB_C_Receptacle - IN | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | P1 |
| 1 | USB_C_Receptacle - OUT | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | P2 |
| 1 | 10k | R_0402_1005Metric | NTC1 |
| 1 | LED RED | LED_0603_1608Metric | D3 |
| 1 | LED BLUE | LED_0603_1608Metric | D4 |
| 1 | XEL3515-561MEC | XEL3515561MEC | L1 |
| 7 | 1 µF | C_0603_1608Metric | C1, C2, C4, C15, C16, C17, C18 |
| 2 | 100 nF | C_0603_1608Metric | C3, C14 |
| 2 | 30pF | C_0603_1608Metric | C5, C6 |
| 1 | 10 µF | C_0603_1608Metric | C7 |
| 1 | 0,1 µF | C_0603_1608Metric | C8 |
| 1 | 0,1 | C_0603_1608Metric | C9 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4,7uF | C_0603_1608Metric | C10 |
| 1 | 10 uF | C_0603_1608Metric | C11 |
| 2 | 4.7 uF | C_0603_1608Metric | C12, C13 |
| 2 | 5,1 kΩ | R_0402_1005Metric | R1, R2 |
| 3 | 0 Ω | R_0402_1005Metric | R3, R4, R5 |
| 2 | 22 kΩ | R_0402_1005Metric | R6, R7 |
| 3 | 6,2k Ohm | R_0402_1005Metric | R8, R9, R16 |
| 4 | 1k | R_0402_1005Metric | R10, R11, R13, R14 |
| 1 | 100 | R_0402_1005Metric | R12 |
| 1 | 10k | R_0402_1005Metric | R15 |
Ipad-Huelle design files
The KiCad project lives in the Jolomolokolo/Ipad-Huelle repository on GitHub; these links point at the commit this page was built from.
- LayoutIpad-Huelle.kicad_pcb
- SchematicIpad-Huelle.kicad_sch
Ipad-Huelle: common questions
How big is the Ipad-Huelle PCB?
The Ipad-Huelle measures 40.7 × 74.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ipad-Huelle?
48 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ipad-Huelle design files?
From the Jolomolokolo/Ipad-Huelle repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Ipad-Huelle design in my own project?
The repository has no license, so all rights stay with Jolomolokolo. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k