5 open source boards using the 7812

Real designs built with the 7812, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the 7812

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 7812 connects to, and the resistors, capacitors and other passives placed on it.

  • The IN pin has a capacitor to GND on 4 of 5 designs, most often 220 pF (then 470 pF).
  • The OUT pin is tied to 12V on 4 of 5 designs.
INpin 1Connected to: Signal 80% · 24V 20%
  • Capacitor to GND on 80% · 220 pF (1), 470 pF (1), 1 µF (1)
GNDpin 2Connected to: GND 80% · a signal 20%
OUTpin 3Connected to: 12V 80% · a signal 20%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Megadesk by gcormier, MixSID by hbekel, DualLM317BenchSupply by cellularmitosis and Control by Jonny999999.

The 7812 in open source designs

The gallery holds 5 open source boards using the 7812 from 5 GitHub repositories; a typical one measures about 82 × 99.7 mm and carries around 61 components.

100% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is Megadesk by gcormier.

Parts used alongside the 7812

Microcontrollers on boards using the 7812

7812: common questions

Where can I find a 7812 reference design?

Each of the 5 boards on this page is a real design using the 7812. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 7812 IN pin connected?

The IN pin has a capacitor to GND on 4 of 5 designs, most often 220 pF (then 470 pF). Counted from the KiCad layouts of 5 open source designs using the 7812.

How is the 7812 OUT pin connected?

The OUT pin is tied to 12V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 7812.

Which microcontrollers do boards using the 7812 use?

Most are built on AVR/Arduino (2).

How big is a typical board using the 7812?

The median is 82 × 99.7 mm, and 100% are two-layer designs.

What is the most popular open source board using the 7812?

By GitHub stars, Megadesk by gcormier, with 818 stars.

Can I simulate one of these boards using the 7812 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part