N2k atom can485 hw
jtroyer76·n2k_atom_can485_hw·kicad/n2k_atom_can485.kicad_pcb
About the N2k atom can485 hw PCB
N2k atom can485 hw is an open source ESP32 PCB design by jtroyer76, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 32 × 64 mm, with 28 components from 20 distinct parts.
Its main chip is the Seeed 113991114, from the ESP32 family. Other key parts include the LMR54406DBVR, TJA1051T/3/1J and CA-IS2092VW. By type, the board carries 12 capacitors, 5 resistors, 4 ICs, 4 diodes, 1 connector and 1 fuse.
From the project
A carrier board for the Seeed Studio XIAO ESP32-S3 that puts NMEA 2000 (CAN) and RS485/RS422 on one board, with a 3D-printed enclosure. It is powered from the NMEA 2000 drop, so one cable carries power and data. Made for gateways between NMEA 0183 devices on RS422 (for example an
A carrier board for the Seeed Studio XIAO ESP32-S3 that puts NMEA 2000 (CAN) and RS485/RS422 on one board, with a 3D-printed enclosure. It is powered from the NMEA 2000 drop, so one cable carries power and data. Made for gateways between NMEA 0183 devices on RS422 (for example an AIS transponder) and an NMEA 2000 network. (The name is from a first plan built on the M5Stack ATOM.)

Main components on the N2k atom can485 hw
N2k atom can485 hw bill of materials (BOM)
28 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMR54406DBVR | SOT-23-6 | U1 |
| 1 | TJA1051T/3/1J TJA1051T/3 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | CA-IS2092VW | SOIC-16W_7.5x10.3mm_P1.27mm | U3 |
| 1 | Seeed 113991114 XIAO ESP32-S3 | XIAO-ESP32-S3-SMD | U4 |
| 1 | MAX MX15EDGRC-3.5-07P-GN01-Cu-A NMEA2000_RS485 | MX15EDGRC-3.5-07P | J1 |
| 1 | BSMD1812-050-60V 0.5A/60V PTC | Fuse_1812_4532Metric | F1 |
| 1 | SMBJ20A (unidirectional TVS) SMBJ20A | D_SMB | D1 |
| 1 | SS14 (reverse polarity) SS14 | D_SMA | D2 |
| 1 | B5819W | D_SOD-123 | D3 |
| 1 | PESD2CAN,215 PESD2CAN | SOT-23 | D4 |
| 1 | SWPA5040S150MT 15u | L_Sunlord_SWPA5040S | L1 |
| 1 | 4.7U/50V 4.7u/50V | C_1206_3216Metric | C1 |
| 6 | 100N/50V 100n/50V | C_0603_1608Metric | C2, C3, C5, C6, C8, C11 |
| 1 | 22U/25V 22u/25V | C_0805_2012Metric | C4 |
| 2 | 10U/25V 10u/25V | C_0805_2012Metric | C7, C10 |
| 2 | 1U/50V 1u/50V | C_0603_1608Metric | C9, C12 |
| 1 | C25808 120k 1% | R_0603_1608Metric | R1 |
| 1 | C31850 22k 1% | R_0603_1608Metric | R2 |
| 2 | C22787 120 1% | R_0603_1608Metric | R3, R5 |
| 1 | C25804 10k 1% | R_0603_1608Metric | R4 |
N2k atom can485 hw design files
The KiCad project lives in the jtroyer76/n2k_atom_can485_hw repository on GitHub; these links point at the commit this page was built from.
N2k atom can485 hw: common questions
What microcontroller does the N2k atom can485 hw use?
The N2k atom can485 hw is built around the Seeed 113991114, from the ESP32 family.
How big is the N2k atom can485 hw PCB?
The N2k atom can485 hw measures 32 × 64 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the N2k atom can485 hw?
28 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the N2k atom can485 hw design files?
From the jtroyer76/n2k_atom_can485_hw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the N2k atom can485 hw design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which jtroyer76 chose for the repository.
Can I test firmware for the N2k atom can485 hw without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k