Espacio inmersivo

JuanJoToAl·Espacio-inmersivo·Espacio inmersivo_esp 32/Espacio inmersivo_esp 32.kicad_pcb

Espacio inmersivo PCB layout, top view — open source ESP32 board by JuanJoToAl

About the Espacio inmersivo PCB

Espacio inmersivo is an open source ESP32 PCB design by JuanJoToAl, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 5 components from 5 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the L293D. By type, the board carries 2 ICs, 2 connectors and 1 battery holder.

From the project

Estructura automatizada que permite al usuario desplazarse entre proyecciones mediante sensores de proximidad

Main components on the Espacio inmersivo

Espacio inmersivo bill of materials (BOM)

5 components, 5 distinct parts.

QtyPartRefs
1
ESP32-DEVKIT-V1
U1
1
L293D
U2
1
pines hembra ultrasonido
J1
1
1729128 Terminal tornillo_motor
J2
1
BH9VW
BT2

Espacio inmersivo design files

The KiCad project lives in the JuanJoToAl/Espacio-inmersivo repository on GitHub; these links point at the commit this page was built from.

Espacio inmersivo: common questions

What microcontroller does the Espacio inmersivo use?

The Espacio inmersivo is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the Espacio inmersivo PCB?

The Espacio inmersivo measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Espacio inmersivo?

5 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Espacio inmersivo design files?

From the JuanJoToAl/Espacio-inmersivo repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Espacio inmersivo design in my own project?

The repository has no license, so all rights stay with JuanJoToAl. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Espacio inmersivo without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards