Paddlecard
juhapark21·paddlecard·pcb/FalloutPCB.kicad_pcb
About the Paddlecard PCB
Paddlecard is an open source ESP32 PCB design by juhapark21, published on GitHub. It is a 2-layer board measuring 88.5 × 49.1 mm, with 5 components from 5 distinct parts.
Its main chip is the XIAO-ESP32-S3-DIP, from the ESP32 family. Other key parts include the ULN2003ADR. By type, the board carries 2 ICs and 1 buzzer.
It belongs with the wearables designs in this gallery.
From the project
A badge for Fallout that also acts as a CW paddle!
https://github.com/user-attachments/assets/16b79e51-f1e2-474d-b4b4-8ff066ea9f76
Main components on the Paddlecard
Paddlecard bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-S3-DIP | XIAO-ESP32S3-DIP | U1 |
| 1 | ULN2003ADR Texas Instruments | ULN2003ADR | U3 |
| 1 | C252925 Buzzer | GMC25125YB-42R800 | BZ1 |
| 1 | C209770 WPM_CTRL | RK09K1130A6S | RV1 |
| 1 | C209770 PITCH_CTRL | RK09K1130A6S | RV2 |
Paddlecard design files
The KiCad project lives in the juhapark21/paddlecard repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/FalloutPCB.kicad_pcb
- Schematicpcb/FalloutPCB.kicad_sch
- BOMbom.csv
Paddlecard: common questions
What microcontroller does the Paddlecard use?
The Paddlecard is built around the XIAO-ESP32-S3-DIP, from the ESP32 family.
How big is the Paddlecard PCB?
The Paddlecard measures 88.5 × 49.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Paddlecard?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Paddlecard design files?
From the juhapark21/paddlecard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Paddlecard design in my own project?
The repository has no license, so all rights stay with juhapark21. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Paddlecard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k