Proyecto 1
Juliodelarosap·Electiva_c2-2023·proyecto_1/proyecto_1.kicad_pcb
About the Proyecto 1 PCB
Proyecto 1 is an open source ESP32 PCB design by Juliodelarosap, published on GitHub. It is a 2-layer board measuring 102.4 × 83.1 mm, with 89 components from 43 distinct parts.
Its main chip is the SP485ECN-L, from the ESP32 family. Other key parts include the TD521D485H-E, FODM2705, ULN2003A, AZ921 and SMBJ12CA. By type, the board carries 31 resistors, 19 ICs, 17 diodes, 10 capacitors, 8 connectors and 2 fuses.
From the project
¡Bienvenidos a la emocionante electiva de Diseño Mecatrónico! En este curso, exploraremos el fascinante mundo de la mecatrónica, una disciplina interdisciplinaria que combina elementos de la ingeniería mecánica, electrónica y de control para diseñar sistemas inteligentes y autóno
¡Bienvenidos a la emocionante electiva de Diseño Mecatrónico! En este curso, exploraremos el fascinante mundo de la mecatrónica, una disciplina interdisciplinaria que combina elementos de la ingeniería mecánica, electrónica y de control para diseñar sistemas inteligentes y autónomos.
En un mundo cada vez más impulsado por la tecnología, la mecatrónica desempeña un papel fundamental en la creación de productos y soluciones innovadoras. Desde los robots industriales que optimizan la producción, hasta los vehículos autónomos que transforman la movilidad, el diseño mecatrónico es la base de…
Main components on the Proyecto 1
Proyecto 1 bill of materials (BOM)
89 components, 43 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TD521D485H-E ULN2003A | U1 | |
| 4 | FODM2705 AZ921 | U2, U3, U4, U5 | |
| 1 | ULN2003A AZ921 | U6 | |
| 4 | AZ921 FODM2705 | FODM2705 | U7, U8, U9, U10 |
| 1 | AZ921 TD521D485H-E | TD521D485H-E | U11 |
| 1 | SMBJ12CA | SMBJ12CA | U12 |
| 1 | SP485ECN-L ESP32-WROOM-32 | ESP32-WROOM-32 | U13 |
| 1 | SMBJ12CA B0505S-W2R2 | B0505S-W2R2 | U14 |
| 3 | fuse_CC12H1.5A-TR | CC12H1.5A-TR | U15, U18, U19 |
| 1 | SP485ECN-L | SOIC127P600X175-8N | U16 |
| 1 | ESP32-WROOM-32 SMBJ12CA | SMBJ12CA | U17 |
| 3 | SCREW_TERMINAL_01X02 TBP04R12-500-02GR | CUI_TBP04R12-500-02GR | J1, J2, J3 |
| 1 | SCREW_TERMINAL_01X03 TBP04R12-500-03GR | CUI_TBP04R12-500-03GR | J4 |
| 2 | SCREW_TERMINAL_01X08 TBP04R12-500-08GR | CUI_TBP04R12-500-08GR | J5, J6 |
| 1 | SCREW_TERMINAL_01X06 Screw_Terminal_01x06 | PinHeader_2x03_P2.54mm_Vertical | J7 |
| 1 | ESP32-JTAG Conn_ARM_JTAG_SWD_10 | PinHeader_2x05_P2.54mm_Vertical | J8 |
| 2 | PTS120660V010 | RESC3115X65N | F1, F2 |
| 1 | HLK-PM12 | Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 1 | MOV-10D561K | MOV-10D561 | V1 |
| 12 | LED | D1, D2, D3, D4, D5, D6, D7, D8 +4 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SM712_SOT23 | SOT-23 | D11, D13 |
| 1 | 1SMA5918BT3G | D_SMB | D14 |
| 1 | SM712_SOT23 | SOT-23 | D15 |
| 1 | 1SMA5918BT3G | D_SMB | D17 |
| 5 | 0.1UF 0.1 | C1, C2, C3, C4, C5 | |
| 1 | 22 | C6 | |
| 1 | 0.1 | C7 | |
| 3 | C | C8, C9, C10 | |
| 2 | 330 1k | R1, R3 | |
| 2 | 1k | R2, R4 | |
| 1 | 10K 1k | R5 | |
| 2 | 10K 10 | R6, R13 | |
| 2 | 470 10 | R7, R8 | |
| 2 | 330 10 | R9, R11 | |
| 2 | 10 | R10, R12 | |
| 1 | 10K 10k | R14 | |
| 2 | 470 R | R15, R16 | |
| 6 | R | R17, R18, R19, R20, R21, R25 | |
| 1 | 2.2K R | R22 | |
| 2 | 2.2 R | R23, R24 | |
| 1 | 22k | R26 | |
| 1 | 22K R | R27 | |
| 4 | 10K R | R28, R29, R30, R31 |
Proyecto 1 design files
The KiCad project lives in the Juliodelarosap/Electiva_c2-2023 repository on GitHub; these links point at the commit this page was built from.
Proyecto 1: common questions
What microcontroller does the Proyecto 1 use?
The Proyecto 1 is built around the SP485ECN-L, from the ESP32 family.
How big is the Proyecto 1 PCB?
The Proyecto 1 measures 102.4 × 83.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Proyecto 1?
89 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Proyecto 1 design files?
From the Juliodelarosap/Electiva_c2-2023 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Proyecto 1 design in my own project?
The repository has no license, so all rights stay with Juliodelarosap. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Proyecto 1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Electiva_c2-2023
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k