ESP32 Micromouse PCB
JulioxTito·ESP32_Micromouse_PCB_KICAD·Hardware_Files/esp32_micromouse_controller.kicad_pcb
About the ESP32 Micromouse PCB
ESP32 Micromouse PCB is an open source ESP32 PCB design by JulioxTito, published on GitHub. It is a 2-layer board measuring 50 × 80 mm, with 18 components from 12 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 6 resistors, 4 connectors, 4 capacitors, 2 ICs and 2 switches.
It belongs with the robotics & motion, dev boards & breakouts and sensors designs in this gallery.
From the project
Custom 2-layer PCB designed in KiCad for an autonomous Micromouse robot. Integrates an ESP32-S3 microcontroller, USB-C 5V to 3.3V power regulation, dual I2C distance sensor breakouts, and a motor driver interface.
A custom, compact (50 mm × 80 mm) robotics controller and sensor breakout PCB engineered for autonomous maze-solving Micromouse robots. Designed in KiCad 10, the board integrates dual Time-of-Flight / IR distance sensor interfaces, a dual DC motor driver header, USB-C power delivery, and an onboard 3.3V LDO regulator around an ESP32-S3-WROOM-1 high-performance dual-core microcontroller.

Main components on the ESP32 Micromouse PCB
ESP32 Micromouse PCB bill of materials (BOM)
18 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 2 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J3, J4 |
| 2 | SW_Push | SW_PUSH_6mm | SW1, SW2 |
| 2 | 10uF | C_0805_2012Metric | C1, C2 |
| 1 | 0.1uF | C_0805_2012Metric | C3 |
| 1 | 1uF | C_0805_2012Metric | C4 |
| 2 | 5.1k | R_0805_2012Metric | R1, R2 |
| 2 | 10K | R_0805_2012Metric | R3, R4 |
| 2 | 4.7k | R_0805_2012Metric | R5, R6 |
ESP32 Micromouse PCB design files
The KiCad project lives in the JulioxTito/ESP32_Micromouse_PCB_KICAD repository on GitHub; these links point at the commit this page was built from.
ESP32 Micromouse PCB: common questions
What microcontroller does the ESP32 Micromouse PCB use?
The ESP32 Micromouse PCB is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the ESP32 Micromouse PCB?
The ESP32 Micromouse PCB measures 50 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32 Micromouse PCB?
18 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32 Micromouse PCB design files?
From the JulioxTito/ESP32_Micromouse_PCB_KICAD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32 Micromouse PCB design in my own project?
The repository has no license, so all rights stay with JulioxTito. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32 Micromouse PCB without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k