ZigbeeTemperaturReaderHW
jwillner·ZigbeeTemperaturReaderHW
About the ZigbeeTemperaturReaderHW PCB
ZigbeeTemperaturReaderHW is an open source ESP32 PCB design by jwillner, published on GitHub. It is a 2-layer board measuring 48 × 74 mm, with 16 components from 9 distinct parts.
Its main chip is the Waveshare-ESP32-C6-Zero, from the ESP32 family. Other key parts include the RT9080-33GJ5. By type, the board carries 5 capacitors, 4 resistors, 2 ICs, 2 jumpers, 1 switch and 1 LED.
It belongs with the iot & wireless and displays & leds designs in this gallery.
From the project
Batteriebetriebener Zigbee-Sensor für die Wand. Er misst mit zwei DS18B20-Fühlern die Vorlauf- und Rücklauftemperatur einer Heizung, zeigt sie auf einem kleinen OLED-Display an und meldet sie per Zigbee an Home Assistant.
Batteriebetriebener Zigbee-Sensor für die Wand. Er misst mit zwei DS18B20-Fühlern die Vorlauf- und Rücklauftemperatur einer Heizung, zeigt sie auf einem kleinen OLED-Display an und meldet sie per Zigbee an Home Assistant.
Dieses Repository enthält die Hardware: Schaltplan, Platine und Gehäuse. Die Firmware liegt in einem eigenen Repository, siehe Software.
Die Firmware muss genau die Pins verwenden, an die die Platine die Signale führt:

Main components on the ZigbeeTemperaturReaderHW
ZigbeeTemperaturReaderHW bill of materials (BOM)
16 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | Waveshare-ESP32-C6-Zero | U1 |
| 1 | RT9080-33GJ5 | TSOT-23-5_RIT-L | U2 |
| 1 | ~ | BatteryHolder_3xAAA | BAT2 |
| 2 | FC68133 | JY039-5P | JP1, JP2 |
| 1 | TL1105BF160Q | SW_TL1105BF160Q | S2 |
| 1 | ~ | OLED-0.96-SSD1306-I2C | OLED2 |
| 4 | CC1206KRX7R9BB104 | C_1206_3216Metric | C1, C2, C4, C5 |
| 1 | CC1206KKX7RDBB102 | C_1206_3216Metric | C6 |
| 4 | RC1206JR-7W1RLC19632287 | R_1206_3216Metric | R1, R2, R3, R4 |
ZigbeeTemperaturReaderHW design files
The KiCad project lives in the jwillner/ZigbeeTemperaturReaderHW repository on GitHub; these links point at the commit this page was built from.
ZigbeeTemperaturReaderHW: common questions
What microcontroller does the ZigbeeTemperaturReaderHW use?
The ZigbeeTemperaturReaderHW is built around the Waveshare-ESP32-C6-Zero, from the ESP32 family.
How big is the ZigbeeTemperaturReaderHW PCB?
The ZigbeeTemperaturReaderHW measures 48 × 74 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ZigbeeTemperaturReaderHW?
16 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the ZigbeeTemperaturReaderHW design files?
From the jwillner/ZigbeeTemperaturReaderHW repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ZigbeeTemperaturReaderHW design in my own project?
The repository has no license, so all rights stay with jwillner. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ZigbeeTemperaturReaderHW without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k