Bracelet
Jzn-wbr·Starter·schema/bracelet/bracelet.kicad_pcb
About the Bracelet PCB
Bracelet is an open source ESP32 PCB design by Jzn-wbr, published on GitHub. It is a 2-layer board measuring 36.8 × 29.5 mm, with 18 components from 15 distinct parts.
Its main chip is the ESP32-C3, from the ESP32 family. Other key parts include the AUIPS1051L and BMI270. By type, the board carries 6 connectors, 4 resistors, 3 ICs, 2 capacitors, 1 transistor and 1 fuse.
From the project
Un système de réveil connecté qui combine une station audio, un bracelet de mouvement et une application mobile pour transformer le réveil en un vrai départ de journée.
Un système de réveil connecté qui combine une station audio, un bracelet de mouvement et une application mobile pour transformer le réveil en un vrai départ de journée.
Projet personnel · Version finale du produit
Les réveils classiques s’arrêtent d’une pression sur un bouton. Celui-ci est pensé pour rendre le retour au sommeil beaucoup plus difficile : l’alarme démarre à l’heure choisie et ne se calme qu’après avoir détecté une activité réelle grâce au bracelet.

Main components on the Bracelet
Bracelet bill of materials (BOM)
18 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3 | ESP32-C3 HW-466B | U1 |
| 1 | AUIPS1051L | SOT-223-3_TabPin2 | U2 |
| 1 | BMI270 | BMI270 module | U3 |
| 1 | AO3400A | SOT-23 | Q1 |
| 1 | IN+ | SolderWirePad_1x01_SMD_2x4mm | J1 |
| 1 | B+ | SolderWirePad_1x01_SMD_2x4mm | J2 |
| 1 | IN- | SolderWirePad_1x01_SMD_2x4mm | J3 |
| 1 | B- | SolderWirePad_1x01_SMD_2x4mm | J4 |
| 1 | Vib+ | SolderWirePad_1x01_SMD_2x4mm | J5 |
| 1 | Vib- | SolderWirePad_1x01_SMD_2x4mm | J6 |
| 1 | Polyfuse | C_Disc_D5.0mm_W2.5mm_P5.00mm | F1 |
| 1 | 1N5819 | D_SMA | D1 |
| 2 | 1u | C_0805_2012Metric | C1, C2 |
| 3 | 100k | R_1206_3216Metric | R1, R2, R4 |
| 1 | 100 | R_1206_3216Metric | R3 |
Bracelet design files
The KiCad project lives in the Jzn-wbr/Starter repository on GitHub; these links point at the commit this page was built from.
Bracelet: common questions
What microcontroller does the Bracelet use?
The Bracelet is built around the ESP32-C3, from the ESP32 family.
How big is the Bracelet PCB?
The Bracelet measures 36.8 × 29.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bracelet?
18 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bracelet design files?
From the Jzn-wbr/Starter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Bracelet design in my own project?
The repository has no license, so all rights stay with Jzn-wbr. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Bracelet without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Starter
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k