Osa103k backup
About the Osa103k backup PCB
Osa103k backup is an open source PCB design by k3it, published on GitHub. It is a 2-layer board measuring 82.6 × 53 mm, with 267 components from 63 distinct parts.
Other key parts include the AD8009ARZ, AD9288BST-40, AT45DB041D-SU, LP2985-1.8 and XC6SLXN-TQG144. By type, the board carries 112 capacitors, 110 resistors, 14 inductors, 11 ICs, 8 diodes and 6 connectors.
It belongs with the test & measurement and rf & radio designs in this gallery.
From the project
Software Defined Multifunctional Measurment Device - VNA, Oscilloscope, Antenna Analyzer, Signal Generator, etc
- Some years ago, I entered the OSA103 schematic, published by the device's author, into KiCad, and routed and created the PCB. I was able to assemble the device and was in the process of debugging it. It was a personal project undertaken out of pure curiosity and to learn KiCad. Unfortunately, my vision started to deteriorate to the point where troubleshooting a small SMD board was no longer enjoyable, and I ultimately abandoned the project. I am releasing all of the files from the project directory, including the gerbers, in case someone finds them useful.
Main components on the Osa103k backup
Osa103k backup bill of materials (BOM)
267 components, 63 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AD8009ARZ | SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | AD9288BST-40 | LQFP-48_7x7mm_Pitch0.5mm | U2 |
| 1 | AT45DB041D-SU | SOIC-8_3.9x4.9mm_Pitch1.27mm | U3 |
| 1 | LP2985-1.8 | SOT-23-5 | U4 |
| 1 | XC6SLXN-TQG144 | TQFP-144_20x20mm_Pitch0.5mm | U5 |
| 1 | 74LVC1GU04 | SOT-23-5 | U6 |
| 1 | 74LVC2G14 | SOT-23-6 | U7 |
| 1 | TPS60403_DBV_5 | SOT-23-5 | U8 |
| 1 | TPS62200DBV | SOT-23-5 | U9 |
| 1 | LDK130-08_SOT23_SOT353 | SOT-23-5 | U10 |
| 1 | FT232RL | SSOP-28_5.3x10.2mm_Pitch0.65mm | U11 |
| 3 | BC846 | SOT-23 | Q1, Q2, Q3 |
| 1 | VTCXO-14 | Crystal_SMD_SeikoEpson_TSX3225-4pin_3.2x2.5mm | X1 |
| 2 | Conn_Coaxial | Molex_SMA_Jack_Edge_Mount | J1, J2 |
| 2 | Conn_01x03 | Pin_Header_Straight_1x03_Pitch2.54mm | J3, J6 |
| 1 | Conn_01x07 | Pin_Header_Straight_1x07_Pitch2.54mm | J10 |
| 1 | USB_OTG | USB_Micro-B | J12 |
| 1 | 20k | Potentiometer_Trimmer_Vishay_TS53YJ | RV18 |
| 1 | 1k | Potentiometer_Trimmer_Vishay_TS53YJ | RV24 |
| 6 | BAV99 | SOT-23 | D1, D2, D5, D6, D7, D8 |
Show 43 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | red | LED_0805 | D3 |
| 1 | green | LED_0805 | D4 |
| 4 | 560n | Neosid_Inductor_SM-NE29_SMD1008 | L1, L2, L3, L4 |
| 3 | BLM21PG221 | R_0805 | L5, L9, L12 |
| 6 | BLM21AG102 | R_0805 | L6, L7, L8, L11, L13, L14 |
| 1 | 10uH | CDRH3D16 | L10 |
| 24 | 10uF | C_0805 | C1, C6, C10, C13, C24, C33, C40, C42 +16 |
| 6 | 22uF | C_1206 | C2, C71, C76, C78, C81, C84 |
| 4 | 15p | C_0603 | C3, C15, C34, C35 |
| 2 | 470p | C_0805 | C4, C14 |
| 3 | 2.2p | C_0603 | C5, C38, C39 |
| 44 | 1uF | C_0603 | C7, C8, C19, C20, C21, C22, C23, C30 +36 |
| 4 | NI | C_0603 | C9, C16, C17, C54 |
| 15 | 0.1uF | C_0603 | C11, C12, C25, C26, C29, C31, C36, C46 +7 |
| 1 | 3..10p | C_Trimmer_Murata_TZC3 | C18 |
| 2 | 6.2p | C_0603 | C27, C28 |
| 2 | 47p | C_0603 | C103, C105 |
| 4 | 3.6p | C_0805 | C106, C107, C108, C109 |
| 1 | 10nF | C_0603 | C112 |
| 2 | 49.9 1% | R_1206 | R1, R6 |
| 6 | 1 | R_0603 | R2, R3, R35, R78, R79, R80 |
| 3 | 2k 1% | R_0603 | R4, R88, R89 |
| 3 | 10 | R_0603 | R5, R10, R85 |
| 5 | 82 | R_0603 | R7, R8, R15, R16, R71 |
| 5 | 910 | R_0603 | R9, R12, R27, R63, R86 |
| 2 | 270 | R_0603 | R11, R21 |
| 3 | 20k | R_0603 | R13, R17, R20 |
| 1 | 390 | R_0603 | R14 |
| 2 | NI | R_0603 | R19, R68 |
| 2 | 200 | R_0603 | R22, R23 |
| 18 | 470 1% | R_0603 | R25, R37, R50, R51, R52, R53, R54, R55 +10 |
| 16 | 240 1% | R_0603 | R26, R30, R31, R34, R38, R39, R40, R41 +8 |
| 2 | 2M | R_0603 | R28, R67 |
| 4 | 5.1k | R_0603 | R29, R75, R76, R82 |
| 1 | 8.2k | R_0603 | R32 |
| 1 | 10nF | C_0603 | R33 |
| 7 | 24.9k 1% | R_0603 | R36, R73, R74, R94, R95, R96, R97 |
| 6 | 10k | R_0603 | R49, R62, R69, R72, R90, R91 |
| 3 | 15 | R_0603 | R64, R92, R93 |
| 6 | 68 | R_0603 | R66, R70, R77, R83, R84, R87 |
| 1 | 7.5k | R_0603 | R81 |
| 4 | 75k 1% | R_0805 | R98, R99, R100, R101 |
| 7 | 150 | R_Array_Convex_4x0603 | RN1, RN2, RN3, RN4, RN5, RN6, RN7 |
Osa103k backup design files
The KiCad project lives in the k3it/osa103-mini repository on GitHub; these links point at the commit this page was built from.
Osa103k backup: common questions
How big is the Osa103k backup PCB?
The Osa103k backup measures 82.6 × 53 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Osa103k backup?
267 components, from 63 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Osa103k backup design files?
From the k3it/osa103-mini repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Osa103k backup design in my own project?
The repository has no license, so all rights stay with k3it. Use it as a reference, and ask the author before reusing the design.
More boards in osa103-mini
Similar boards
Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675
Hat
65 × 56 mm81 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
DB9 High-Low Signal Generator
nanographs
47 × 30 mm10 parts2LNo license370
OneInchEye
will127534
39 × 39 mm79 parts4LMIT346
Open smartwatch light
Open-Smartwatch
36.1 × 36.1 mm51 parts4LGPL-3.0246