7 open source boards using the 74LVC1GU04
Real designs built with the 74LVC1GU04, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Saturn
numato
62.8 × 57.5 mm151 partsNo license143RadioThermal Soldering OSHW
RadioThermal
100 × 75 mm54 parts2LCERN-OHL-P-2.078RP2040/RP2350
HALPI2-hardware
hatlabs
187 × 109 mm541 parts6LCustom license9ESP32
Tanmatsu hardware
Nicolai-Electronics
114.9 × 129.9 mm320 parts4LCERN-OHL-P-2.09Osa103k
k3it
82.6 × 53 mm267 parts2LNo license6STM32
VERTEX
MiksBalodis
86.8 × 48.3 mm124 parts4LNo license0Osa103k backup
k3it
82.6 × 53 mm267 parts2LNo license6
How designs wire the 74LVC1GU04
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74LVC1GU04 connects to, and the resistors, capacitors and other passives placed on it.
- The NC_1 pin is left unconnected on 6 of 6 designs.
- The VCC_5 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF).
- Pin 2 has a series resistor on 4 of 6 designs, most often 2 MΩ (then 10 kΩ).
- Pin 4 has a series resistor on 3 of 6 designs, most often 2 MΩ (then 330 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NC_1pin 1 | Connected to: Not connected 100% | — |
| Pin 2 | Connected to: Signal 100% |
|
| GND_3pin 3 | Connected to: GND 100% | — |
| Pin 4 | Connected to: Signal 100% |
|
| VCC_5pin 5 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Saturn by numato, RadioThermal Soldering OSHW by RadioThermal, HALPI2-hardware by hatlabs and Tanmatsu hardware by Nicolai-Electronics.
The 74LVC1GU04 in open source designs
The gallery holds 7 open source boards using the 74LVC1GU04 from 6 GitHub repositories; a typical one measures about 86.8 × 57.5 mm and carries around 267 components.
50% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Saturn by numato.
Microcontrollers on boards using the 74LVC1GU04
What boards using the 74LVC1GU04 are built for
74LVC1GU04: common questions
Where can I find a 74LVC1GU04 reference design?
Each of the 7 boards on this page is a real design using the 74LVC1GU04. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LVC1GU04 NC_1 pin connected?
The NC_1 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 74LVC1GU04.
What decoupling capacitors do designs use on the 74LVC1GU04 VCC_5 pin?
The VCC_5 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the 74LVC1GU04.
What resistor goes on the 74LVC1GU04 pin 2?
Pin 2 has a series resistor on 4 of 6 designs, most often 2 MΩ (then 10 kΩ). Counted from the KiCad layouts of 6 open source designs using the 74LVC1GU04.
Which microcontrollers do boards using the 74LVC1GU04 use?
Most are built on ESP32 (1), FPGA (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the 74LVC1GU04?
The median is 86.8 × 57.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the 74LVC1GU04?
By GitHub stars, Saturn by numato, with 143 stars.
Can I simulate one of these boards using the 74LVC1GU04 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.