Eeg sensor card

kaanpars·16_channels_eeg_card·v0-discrete-afe/eeg_sensor_card.kicad_pcb

Eeg sensor card PCB layout, top view — open source board by kaanpars

About the Eeg sensor card PCB

Eeg sensor card is an open source PCB design by kaanpars, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 104.2 × 126.5 mm, with 530 components from 29 distinct parts.

Other key parts include the TLV4333IDR, LP5907MFX-3.3 and INA333AIDGKR. By type, the board carries 261 resistors, 216 capacitors, 34 ICs, 16 jumpers and 3 connectors.

It belongs with the sensors designs in this gallery.

From the project

I designed cards both in INA333 + TLV4333 and ADS1299. It is up to you which analog or digital output you should want to get. Importing restrictions in Turkey dragged me to designing my own sensor cards. ENJOY!

A 16-channel EEG acquisition board, designed twice: first with discrete analog parts (v0), then around TI's ADS1299 (v1). Both versions use the same electrode connector, so one set of cables works with either board.

v0 builds the whole analog signal chain by hand and verifies it in SPICE. v1 solves the same problem with a dedicated EEG chip. It is smaller, quieter and better suited to dry electrodes, but it costs more. The project is about comparing the two approaches.

Eeg sensor card, from the project README
From the project README

Main components on the Eeg sensor card

Eeg sensor card bill of materials (BOM)

530 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
17
TLV4333IDR
U101, U201, U301, U401, U501, U601, U701, U801 +9
1
LP5907MFX-3.3
U102
16
INA333AIDGKR
U202, U302, U402, U502, U602, U702, U802, U902 +8
1
CONN_01X02
Conn_01x02
J101
1
CONN_02X10_ODD_EVEN
Conn_02x10_Odd_Even
J102
1
CONN_02X20_ODD_EVEN
Conn_02x20_Odd_Even
J103
16
JUMPER_3_BRIDGED12
Jumper_3_Bridged12
JP201, JP301, JP401, JP501, JP601, JP701, JP801, JP901 +8
1
1.5N
1.5n
C101
4
10U
10u
C102, C104, C106, C108
2
1u
C103, C105
33
100N
100n
C107, C208, C211, C308, C311, C408, C411, C508 +25
16
1n
C201, C301, C401, C501, C601, C701, C801, C901 +8
96
10N
10n
C202, C203, C204, C205, C212, C213, C302, C303 +88
32
100P
100p
C206, C207, C306, C307, C406, C407, C506, C507 +24
16
330N
330n
C209, C309, C409, C509, C609, C709, C809, C909 +8
16
22N
22n
C210, C310, C410, C510, C610, C710, C810, C910 +8
32
5.49k
R3a201, R3a301, R3a401, R3a501, R3a601, R3a701, R3a801, R3a901 +24
17
1M
R101, R209, R309, R409, R509, R609, R709, R809 +9
1
390K
390k
R102
18
100K
100k
R103, R104, R205, R305, R405, R505, R605, R705 +10
Show 9 more
QtyPartRefs
1
10
R105
32
316K
R201, R206, R301, R306, R401, R406, R501, R506 +24
32
10K
10k
R202, R203, R302, R303, R402, R403, R502, R503 +24
16
158K
158k
R204, R304, R404, R504, R604, R704, R804, R904 +8
32
1k
R207, R210, R307, R310, R407, R410, R507, R510 +24
16
9.1K
9.1k
R208, R308, R408, R508, R608, R708, R808, R908 +8
16
200K
200k
R211, R311, R411, R511, R611, R711, R811, R911 +8
32
113K
113k
R212, R213, R312, R313, R412, R413, R512, R513 +24
16
470
R214, R314, R414, R514, R614, R714, R814, R914 +8

Eeg sensor card design files

The KiCad project lives in the kaanpars/16_channels_eeg_card repository on GitHub; these links point at the commit this page was built from.

Eeg sensor card: common questions

How big is the Eeg sensor card PCB?

The Eeg sensor card measures 104.2 × 126.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Eeg sensor card?

530 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Eeg sensor card design files?

From the kaanpars/16_channels_eeg_card repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Eeg sensor card design in my own project?

Yes, under the terms of its GPL-3.0 license, which kaanpars chose for the repository.

More boards in 16_channels_eeg_card

Similar boards