PypilotRemote
kagouraki·PypilotRemote·pcb/raymarineST70/st70Remote/st70Remote.kicad_pcb
About the PypilotRemote PCB
PypilotRemote is an open source ESP32 PCB design by kagouraki, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 90.5 × 95.4 mm, with 79 components from 20 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the DCMINI. By type, the board carries 23 resistors, 15 connectors, 13 capacitors, 8 LEDs, 6 fuses and 2 ICs.
It belongs with the iot & wireless and displays & leds designs in this gallery.
From the project
Wifi remote for pypilot in the helm
This directory contains the PCB design files for the Pypilot Remote hardware.
The board is designed using KiCad v9 and is intended to be manufactured using standard PCB fabrication and assembly services.
- EDA software: KiCad v9 - Project files: Native KiCad schematic and PCB files - Units: Metric
This file contains LCSC part numbers and additional information useful for ordering parts.

Main components on the PypilotRemote
PypilotRemote bill of materials (BOM)
79 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1U | U1 |
| 1 | DCMINI | DCMINI | U3 |
| 2 | AO3400A | SOT-23 | Q1, Q2 |
| 12 | CONN_01X01 Conn_01x01 | 1x01_P2.54mm | J1, J2, J3, J4, J5, J6, J7, J8 +4 |
| 1 | CONN_01X02 Conn_01x02 | 1x02_P2.54mm | J13 |
| 1 | CONN_01X03 Conn_01x03 | 1x03_P2.54mm_Locking | J14 |
| 1 | UEED035HV-RX40-L001B | XUNPU FPC-05F-40PH20 | J15 |
| 1 | SMD_6.2X6.2MM_H7.0MM SMD_6.2x6.2mm_h7.0mm | Push_SMD_6.2x6.2mm | BL1 |
| 6 | ~ | Harwin S1791-42R | F1, F2, F3, F4, F5, F6 |
| 8 | SMD_6.2x6.2mm_h7.0mm | Push_SMD_6.2x6.2mm | auto1, info1, minusOne1, minusTen1, mode1, plusOne1, plusTen1, standby1 |
| 8 | LED_0805 | LED_0805_2012Metric | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 |
| 1 | ES2AA | D_SMA | D2 |
| 2 | 22UF 22uF | C_1206_3216Metric_Pad1.42x1.75mm | C4, C5 |
| 10 | 0.1UF 0.1uF | C_0805_2012Metric | C6, C7, C8, C9, C10, C11, C12, C13 +2 |
| 1 | 4.7UF 4.7uF | C_0805_2012Metric | C16 |
| 10 | 10K | R_0805_2012Metric | R3, R4, R5, R6, R7, R8, R9, R10 +2 |
| 8 | 33R | R_0805_2012Metric | R13, R14, R15, R16, R17, R18, R19, R20 |
| 2 | 100R | R_0805_2012Metric | R21, R25 |
| 2 | 100K | R_0805_2012Metric | R22, R24 |
| 1 | 5.1R | R_0805_2012Metric | R23 |
PypilotRemote design files
The KiCad project lives in the kagouraki/PypilotRemote repository on GitHub; these links point at the commit this page was built from.
PypilotRemote: common questions
What microcontroller does the PypilotRemote use?
The PypilotRemote is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the PypilotRemote PCB?
The PypilotRemote measures 90.5 × 95.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PypilotRemote?
79 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PypilotRemote design files?
From the kagouraki/PypilotRemote repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PypilotRemote design in my own project?
Yes, under the terms of its GPL-3.0 license, which kagouraki chose for the repository.
Can I test firmware for the PypilotRemote without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k