MIDI-Keypad
KaiPereira·MIDI-Keypad·PCB/MIDI-keypad.kicad_pcb
About the MIDI-Keypad PCB
MIDI-Keypad is an open source ESP32 PCB design by KaiPereira, published on GitHub. It is a 2-layer board measuring 97 × 95 mm, with 11 components from 6 distinct parts.
Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 4 switches, 3 diodes, 1 IC and 1 connector.
It belongs with the displays & leds, audio and keyboards designs in this gallery.
From the project
Learn PCB design by creating your own custom MIDI keypad with switches, sliders, rotary encoders, neopixels and capacitive touch!
Ever wanted to cook up and mix your own beats while simultaneously learning PCB design? Well look no further because your local Kai is about to show you how to make your own custom MIDI keypad completely from scratch.
Now this is YOUR MIDI device, so please use this tutorial as a loose guide and come up with your own custom layout and features to make it awesome; go crazy!!
Main components on the MIDI-Keypad
MIDI-Keypad bill of materials (BOM)
11 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Waveshare ESP32-S3-ZERO | Waveshare ESP32-S3-Zero | U1 |
| 1 | Capacitive Touch Buttons | Capacitive Keys | J1 |
| 2 | Slider | Potentiometer_Bourns_PTA1543_Single_Slide | RV1, RV2 |
| 3 | SW_Push | Kailh Choc Low-Profile Switches | SW1, SW2, SW3 |
| 1 | RotaryEncoder_Switch_MP | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW4 |
| 3 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2, D3 |
MIDI-Keypad design files
The KiCad project lives in the KaiPereira/MIDI-Keypad repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/MIDI-keypad.kicad_pcb
- SchematicPCB/MIDI-keypad.kicad_sch
- BOMPCB/production/bom.csv
MIDI-Keypad: common questions
What microcontroller does the MIDI-Keypad use?
The MIDI-Keypad is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.
How big is the MIDI-Keypad PCB?
The MIDI-Keypad measures 97 × 95 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MIDI-Keypad?
11 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MIDI-Keypad design files?
From the KaiPereira/MIDI-Keypad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MIDI-Keypad design in my own project?
The repository has no license, so all rights stay with KaiPereira. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MIDI-Keypad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k