Picoballoon2020
kajusK·Picoballoon2020·hw/baloon.kicad_pcb
About the Picoballoon2020 PCB
Picoballoon2020 is an open source STM32 PCB design by kajusK, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 22.3 × 49.9 mm, with 62 components from 32 distinct parts.
Its main chip is the STM32F030C8Tx, from the STM32 family. Other key parts include the Si7020-A20, MS5607-02BA, RFM95W-868S2, MAX-8C/SIM28ML and MCP1640. By type, the board carries 23 resistors, 19 capacitors, 8 ICs, 4 connectors, 3 transistors and 3 diodes.
It belongs with the rf & radio, power & battery and sensors designs in this gallery.
From the project
Probe for Observatory and Planetarium Brno Picoballoon Challenge 2020
Picoballoon Challenge 2020, Deadbadger probe ============================================
This probe was designed Picoballoon Challenge organised by Brno Observatory and Planetarium. A goal of this competition is to make a probe under 20 grams that would be launched on ballon to altitudes around 5-15 km. Only requirement except weight is sending altitude of the probe.

Main components on the Picoballoon2020
Picoballoon2020 bill of materials (BOM)
62 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F030C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | Si7020-A20 | DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm | U2 |
| 1 | MS5607-02BA | LGA-8_3x5mm_P1.25mm | U3 |
| 1 | RFM95W-868S2 | HOPERF_RFM9XW_SMD | U4 |
| 1 | MAX-8C/SIM28ML | ublox_MAX | U5 |
| 2 | MCP1640 | SOT-23-6 | U6, U8 |
| 1 | MCP101-270D | SOT-23 | U7 |
| 1 | BC847 | SOT-23 | Q1 |
| 1 | BC857 | SOT-23 | Q2 |
| 1 | DMP2035 | SOT-23 | Q3 |
| 1 | SOLAR | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | DEBUG | PinSocket_1x03_P1.00mm_Vertical_SMD_Pin1Left | J2 |
| 1 | SWO | PinHeader_2x03_P1.27mm_Vertical_SMD | J3 |
| 1 | BAT | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 2 | BAT20J | D_SOD-323 | D1, D2 |
| 1 | 3V | D_SOD-323 | D3 |
| 2 | SRN2510F-4R7M | L_Abracon_ASPI-3012S | L2, L3 |
| 11 | 100n | C_0603_1608Metric | C1, C2, C4, C7, C8, C9, C11, C13 +3 |
| 2 | 1u | C_0603_1608Metric | C6, C12 |
| 5 | 10u | C_0603_1608Metric | C10, C15, C17, C19, C21 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 3F3/3V | R_LDR_5.2x5.2mm_P3.5mm_Horizontal | C18 |
| 6 | 10k | R_0603_1608Metric | R1, R2, R3, R4, R5, R15 |
| 4 | 1M | R_0603_1608Metric | R6, R7, R8, R12 |
| 1 | 510k | R_0603_1608Metric | R9 |
| 1 | 360k | R_0603_1608Metric | R10 |
| 1 | 56 | R_0603_1608Metric | R11 |
| 3 | 100k | R_0603_1608Metric | R13, R16, R17 |
| 1 | DNP | R_0603_1608Metric | R14 |
| 3 | 680k | R_0603_1608Metric | R18, R19, R23 |
| 1 | 390k | R_0603_1608Metric | R20 |
| 1 | 0 | R_0603_1608Metric | R21 |
| 1 | 100 | R_0603_1608Metric | R22 |
Picoballoon2020 design files
The KiCad project lives in the kajusK/Picoballoon2020 repository on GitHub; these links point at the commit this page was built from.
- Layouthw/baloon.kicad_pcb
Picoballoon2020: common questions
What microcontroller does the Picoballoon2020 use?
The Picoballoon2020 is built around the STM32F030C8Tx, from the STM32 family.
How big is the Picoballoon2020 PCB?
The Picoballoon2020 measures 22.3 × 49.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Picoballoon2020?
62 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Picoballoon2020 design files?
From the kajusK/Picoballoon2020 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Picoballoon2020 design in my own project?
Yes, under the terms of its GPL-3.0 license, which kajusK chose for the repository.
Can I test firmware for the Picoballoon2020 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k