12 open source boards using the Si7020-A20
Real designs built with the Si7020-A20, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Piweather
pluggee
65 × 64 mm58 parts4LMIT1ESP32
Smart regulator
physiii
82.5 × 48.6 mm35 parts2LNo license1ESP32
Open dash daughter
physiii
165.5 × 107.3 mm161 parts2LNo license0STM32
Flight-Computer
jainamnahar14surat
50 × 50 mm72 parts6LMIT0STM32
Picoballoon2020
kajusK
22.3 × 49.9 mm62 parts2LGPL-3.00ESP32
Esp32
Hackuarium
85 × 75 mm58 parts2LNo license0ESP32
Led controller
physiii
32 × 63 mm55 parts4LNo license0ESP32
Temp sensor
juniper-garden
48.2 × 24.9 mm55 parts2LGPL-3.00ESP8266
Esp8266
Hackuarium
85 × 75 mm47 parts2LNo license0ESP32
Esp32-s3-testboard
ktauchathuranga
50 × 50 mm35 parts4LNo license0ESP32
Temp sensor panel v2
juniper-garden
115 × 61 mm49 parts2LGPL-3.00ESP32
Temp sensor panel
juniper-garden
188.7 × 147.5 mm40 parts2LGPL-3.00
How designs wire the Si7020-A20
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the Si7020-A20 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 8 of 10 designs, most often 100 nF (then 1 µF).
- The SDA pin has a pull-up to 3.3V on 6 of 10 designs, most often 10 kΩ (then 2.2 kΩ).
- The SCL pin has a pull-up to 3.3V on 6 of 9 designs, most often 10 kΩ (then 2.2 kΩ).
- The PAD pin is left unconnected on 4 of 6 designs (GND on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SDApin 1 | Connected to: The microcontroller 80%, a connector 40%, Power-Monitor-INA219 20% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| NCpin 3, 4 | Connected to: Not connected 95% | — |
| VDDpin 5 | Connected to: 3.3V 100% |
|
| SCLpin 6 | Connected to: The microcontroller 89%, a connector 44%, Power-Monitor-INA219 22% |
|
| PADpin 7 | Connected to: Not connected 67% · GND 33% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Smart regulator by physiii, Piweather by pluggee, Esp8266 by Hackuarium and Esp32 by Hackuarium.
The Si7020-A20 in open source designs
The gallery holds 12 open source boards using the Si7020-A20 from 10 GitHub repositories; a typical one measures about 73.7 × 62 mm and carries around 55 components.
67% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Piweather by pluggee.
Parts used alongside the Si7020-A20
Microcontrollers on boards using the Si7020-A20
What boards using the Si7020-A20 are built for
Si7020-A20: common questions
Where can I find a Si7020-A20 reference design?
Each of the 12 boards on this page is a real design using the Si7020-A20. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the Si7020-A20 VDD pin?
The VDD pin has a decoupling capacitor on 8 of 10 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the Si7020-A20.
What pull-up resistor is used on the Si7020-A20 SDA pin?
The SDA pin has a pull-up to 3.3V on 6 of 10 designs, most often 10 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 10 open source designs using the Si7020-A20.
What pull-up resistor is used on the Si7020-A20 SCL pin?
The SCL pin has a pull-up to 3.3V on 6 of 9 designs, most often 10 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 10 open source designs using the Si7020-A20.
What parts are used alongside the Si7020-A20?
The ESP-WROOM-32, MCP73831-2, MS5637, Power-Monitor-INA219 and REG-3.3v appear in the most repositories here.
Which microcontrollers do boards using the Si7020-A20 use?
Most are built on ESP32 (8), STM32 (2), ESP8266 (1) and Raspberry Pi (1).
How big is a typical board using the Si7020-A20?
The median is 73.7 × 62 mm, and 67% are two-layer designs.
What is the most popular open source board using the Si7020-A20?
By GitHub stars, Piweather by pluggee, with 1 stars.
Can I simulate one of these boards using the Si7020-A20 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.