7 open source boards using the MCP1640

Real designs built with the MCP1640, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the MCP1640

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MCP1640 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 4 has a resistor to GND on 6 of 6 designs, most often 309 kΩ (then 32.4 kΩ).
  • Pin 6 has a decoupling capacitor on 6 of 6 designs, most often 4.7 µF (then 22 µF).
  • Pin 1 has a inductor on 5 of 6 designs, most often 4.7 µH.
  • Pin 2 is tied to GND on 6 of 6 designs.
Pin 1Connected to: Signal 100%
  • Inductor on 83% · 4.7 µH (4)
Pin 2Connected to: GND 100%
Pin 3Connected to: Signal 67% · BATT 33%
  • Resistor to GND on 33% · 32.4 kΩ (1), 10 kΩ (1)
  • Capacitor to GND on 33% · 4.7 µF (2), 10 µF (1)
  • Inductor on 33% · 4.7 µH (1)
  • Pull-up to VBATT on 33% · 10 kΩ (1), 0 Ω (1)
Pin 4Connected to: Signal 100%
  • Resistor to GND on 100% · 309 kΩ (3), 32.4 kΩ (1), 240 kΩ (1)
  • Pull-up to 5V on 67% · 102 kΩ (1), 536 kΩ (1), 750 kΩ (1)
  • Series resistor on 33% · 976 kΩ (1), 510 kΩ (1)
Pin 5Connected to: 5V 67% · a signal 33%
  • Decoupling capacitor on 67% · 10 µF (3), 22 µF (2), 100 nF (1)
Pin 6Connected to: VIN 67% · a signal 33%
  • Decoupling capacitor on 100% · 4.7 µF (4), 22 µF (2), 47 µF (1)
  • Inductor on 83% · 4.7 µH (4)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Current sense by westonb, Interphase by Durburz, Wifi PB by AntonioMR and Component tester by kitspace.

The MCP1640 in open source designs

The gallery holds 7 open source boards using the MCP1640 from 6 GitHub repositories; a typical one measures about 100 × 83 mm and carries around 115 components.

57% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.

The most starred is Current sense by westonb.

Microcontrollers on boards using the MCP1640

MCP1640: common questions

Where can I find a MCP1640 reference design?

Each of the 7 boards on this page is a real design using the MCP1640. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the MCP1640 pin 4?

Pin 4 has a resistor to GND on 6 of 6 designs, most often 309 kΩ (then 32.4 kΩ). Counted from the KiCad layouts of 6 open source designs using the MCP1640.

What decoupling capacitors do designs use on the MCP1640 pin 6?

Pin 6 has a decoupling capacitor on 6 of 6 designs, most often 4.7 µF (then 22 µF). Counted from the KiCad layouts of 6 open source designs using the MCP1640.

How is the MCP1640 pin 1 connected?

Pin 1 has a inductor on 5 of 6 designs, most often 4.7 µH. Counted from the KiCad layouts of 6 open source designs using the MCP1640.

Which microcontrollers do boards using the MCP1640 use?

Most are built on AVR/Arduino (2), ESP8266 (2), PIC (1) and STM32 (1).

How big is a typical board using the MCP1640?

The median is 100 × 83 mm, and 57% are two-layer designs.

What is the most popular open source board using the MCP1640?

By GitHub stars, Current sense by westonb, with 326 stars.

Can I simulate one of these boards using the MCP1640 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part