IPM-165 amplifier circuit
KakuheikiCreator·KiCAD·ipm165_motion_detector/ipm165.kicad_pcb
About the IPM-165 amplifier circuit PCB
IPM-165 amplifier circuit is an open source PCB design by KakuheikiCreator, published on GitHub under the MIT license. It is a 2-layer board measuring 50.8 × 50.8 mm, with 33 components from 22 distinct parts.
Other key parts include the NJM4580, LM358 and AE-XCL103. By type, the board carries 15 resistors, 8 capacitors, 3 ICs, 2 connectors, 2 diodes and 1 transistor.
It belongs with the audio designs in this gallery.
Main components on the IPM-165 amplifier circuit
IPM-165 amplifier circuit bill of materials (BOM)
33 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NJM4580 | DIP08 | U1 |
| 1 | LM358 | DIP08 | U2 |
| 1 | AE-XCL103 | DIP6 | U3 |
| 1 | Q_PMOS_SGD | TO-92_Inline_Wide | Q1 |
| 1 | Conn_01x03_Female | PinSocket_1x03_P2.54mm | J1 |
| 1 | Conn_01x05_Female | JST_XH_S5B-XH-A_1x05_P2.50mm_Horizontal | J2 |
| 1 | 1k | JST_XH_S3B-XH-A_1x03_P2.50mm_Horizontal | RV1 |
| 1 | 1k | Potentiometer_T73YP_Vertical | RV2 |
| 2 | 1N4148 | D_2 | D1, D2 |
| 3 | 10u | C_2 | C1, C2, C4 |
| 2 | 1n | C_2 | C3, C5 |
| 1 | 0.1u | C_2 | C6 |
| 1 | 1u | C_2 | C7 |
| 1 | EMI_Filter_C | TO-220_Filter | C9 |
| 4 | 10k | R_2 | R1, R2, R3, R9 |
| 4 | 1.5k | R_2 | R4, R5, R7, R13 |
| 2 | 150k | R_2 | R6, R8 |
| 1 | 33k | R_2 | R10 |
| 1 | 300k | R_2 | R11 |
| 1 | 3.3k | R_2 | R12 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100k | R_2 | R14 |
| 1 | 1k | R_2 | R15 |
IPM-165 amplifier circuit design files
The KiCad project lives in the KakuheikiCreator/KiCAD repository on GitHub; these links point at the commit this page was built from.
IPM-165 amplifier circuit: common questions
How big is the IPM-165 amplifier circuit PCB?
The IPM-165 amplifier circuit measures 50.8 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IPM-165 amplifier circuit?
33 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the IPM-165 amplifier circuit design files?
From the KakuheikiCreator/KiCAD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the IPM-165 amplifier circuit design in my own project?
Yes, under the terms of its MIT license, which KakuheikiCreator chose for the repository.
More boards in KiCAD
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687