Arduino board
About the Arduino board
Arduino board is an open source AVR/Arduino PCB design by kapibaratomo, published on GitHub. It is a 2-layer board measuring 93.5 × 69 mm, with 6 components from 6 distinct parts.
Its main chip is the ARDUINO_UNO_R3, from the AVR/Arduino family. By type, the board carries 3 connectors, 1 module, 1 switch and 1 resistor.
Main components on the Arduino board
Arduino board bill of materials (BOM)
6 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ARDUINO_UNO_R3 Arduino_UNO_R3 | Arduino_UNO_R3 | A1 |
| 1 | CONN_01X05_SOCKET Conn_01x05_Socket | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | Conn_01x08_Pin | PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 1 | SW_Push | TVGP01-G73BB | SW1 |
| 1 | 10K 10k | R_0603_1608Metric | R1 |
Arduino board design files
The KiCad project lives in the kapibaratomo/Soda_DENGIKEN repository on GitHub; these links point at the commit this page was built from.
Arduino board: common questions
What microcontroller does the Arduino board use?
The Arduino board is built around the ARDUINO_UNO_R3, from the AVR/Arduino family.
How big is the Arduino board?
The Arduino board measures 93.5 × 69 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Arduino board?
6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Arduino board design files?
From the kapibaratomo/Soda_DENGIKEN repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Arduino board design in my own project?
The repository has no license, so all rights stay with kapibaratomo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Arduino board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Soda_DENGIKEN
Motor driver board 1.0
50 × 64 mm54 parts2LNo license0
Motor driver board 1.0 (1)
54.1 × 63.9 mm49 parts2LNo license0
AVR/ArduinoMainboard2.0
94 × 100 mm42 parts2LNo license0
Mein board
120 × 42.9 mm24 parts2LNo license0
Power board 1.0
66.7 × 63.9 mm23 parts2LNo license0
PSU board 1.0
50 × 64 mm23 parts2LNo license0
Power board 1.0 (1)
66.7 × 63.9 mm23 parts2LNo license0
AVR/ArduinoIRboard5.0
99.1 × 99.1 mm18 parts2LNo license0
AVR/ArduinoIR board
99.9 × 99.9 mm18 parts2LNo license0
Linesensor3.1
25.6 × 65 mm15 parts2LNo license0
Sentral board 1.0 (1)
40.6 × 35.9 mm9 parts2LNo license0
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746