HardLabs

IRboard5.0

kapibaratomo·Soda_DENGIKEN·RCJ2025/基盤/gigafile-1111-aed415b24a5f4200b95641769f28dfff/IRboard5.0.kicad_pcb

IRboard5.0 PCB layout, top view — open source AVR/Arduino board by kapibaratomo

About the IRboard5.0 PCB

IRboard5.0 is an open source AVR/Arduino PCB design by kapibaratomo, published on GitHub. It is a 2-layer board measuring 99.1 × 99.1 mm, with 18 components from 3 distinct parts.

Its main chip is the Arduino_Nano_v2.x, from the AVR/Arduino family. Other key parts include the TSSP58P38. By type, the board carries 16 ICs, 1 module and 1 connector.

Main components on the IRboard5.0

TSSP58P38Arduino_Nano_v2.x

IRboard5.0 bill of materials (BOM)

18 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
16
TSSP58P38
U1, U2, U3, U4, U5, U6, U7, U8 +8
1
Arduino_Nano_v2.x
A1
1
CONN_01X02_SOCKET
Conn_01x05_Male
J1

IRboard5.0 design files

The KiCad project lives in the kapibaratomo/Soda_DENGIKEN repository on GitHub; these links point at the commit this page was built from.

IRboard5.0: common questions

What microcontroller does the IRboard5.0 use?

The IRboard5.0 is built around the Arduino_Nano_v2.x, from the AVR/Arduino family.

How big is the IRboard5.0 PCB?

The IRboard5.0 measures 99.1 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the IRboard5.0?

18 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the IRboard5.0 design files?

From the kapibaratomo/Soda_DENGIKEN repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the IRboard5.0 design in my own project?

The repository has no license, so all rights stay with kapibaratomo. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the IRboard5.0 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Soda_DENGIKEN

Similar boards