Motor driver board 1.0
About the Motor driver board 1.0
Motor driver board 1.0 is an open source PCB design by kapibaratomo, published on GitHub. It is a 2-layer board measuring 50 × 64 mm, with 54 components from 12 distinct parts.
Other key parts include the DRV8412DDWR. By type, the board carries 36 capacitors, 10 resistors, 6 connectors and 2 ICs.
It belongs with the robotics & motion designs in this gallery.
Main components on the Motor driver board 1.0
Motor driver board 1.0 bill of materials (BOM)
54 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | DRV8412DDWR | HTSSOP-44-1EP_6.1x14mm_P0.635mm_EP5.2x14mm_Mask4.31x8.26mm | IC1, IC2 |
| 5 | Conn_01x02_Socket | JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal | J1, J2, J3, J4, J5 |
| 1 | Conn_01x08_Socket | 0527450897 | J6 |
| 2 | 1000 | CP_Radial_D10.0mm_P5.00mm | C1, C19 |
| 2 | 10nF | C_0603_1608Metric | C2, C20 |
| 28 | 0.1U 0.1u | C_0603_1608Metric | C3, C4, C5, C6, C7, C8, C9, C10 +20 |
| 2 | 10NF 47 | CP_Radial_D6.3mm_P2.50mm | C17, C35 |
| 2 | 330 | CP_Radial_D10.0mm_P5.00mm | C18, C36 |
| 2 | 30K 3.3 | R_0603_1608Metric | R1, R7 |
| 4 | 30K 30k | R_0603_1608Metric | R2, R5, R8, R11 |
| 2 | 10K 1 | R_0603_1608Metric | R3, R9 |
| 2 | 3.3 30k | R_0603_1608Metric | R6, R12 |
Motor driver board 1.0 design files
The KiCad project lives in the kapibaratomo/Soda_DENGIKEN repository on GitHub; these links point at the commit this page was built from.
Motor driver board 1.0: common questions
How big is the Motor driver board 1.0?
The Motor driver board 1.0 measures 50 × 64 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Motor driver board 1.0?
54 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Motor driver board 1.0 design files?
From the kapibaratomo/Soda_DENGIKEN repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Motor driver board 1.0 design in my own project?
The repository has no license, so all rights stay with kapibaratomo. Use it as a reference, and ask the author before reusing the design.
More boards in Soda_DENGIKEN
Motor driver board 1.0 (1)
54.1 × 63.9 mm49 parts2LNo license0
AVR/ArduinoMainboard2.0
94 × 100 mm42 parts2LNo license0
Mein board
120 × 42.9 mm24 parts2LNo license0
PSU board 1.0
50 × 64 mm23 parts2LNo license0
Power board 1.0
66.7 × 63.9 mm23 parts2LNo license0
Power board 1.0 (1)
66.7 × 63.9 mm23 parts2LNo license0
AVR/ArduinoIRboard5.0
99.1 × 99.1 mm18 parts2LNo license0
AVR/ArduinoIR board
99.9 × 99.9 mm18 parts2LNo license0
Linesensor3.1
25.6 × 65 mm15 parts2LNo license0
Sentral board 1.0 (1)
40.6 × 35.9 mm9 parts2LNo license0
AVR/ArduinoArduino board
93.5 × 69 mm6 parts2LNo license0
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Mesabob
rene-dev
87.5 × 50 mm44 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Triple adapter
57 × 75 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979