IR board
kapibaratomo·Soda_DENGIKEN·NEST2025/基板/IR board/IR board.kicad_pcb
About the IR board
IR board is an open source AVR/Arduino PCB design by kapibaratomo, published on GitHub. It is a 2-layer board measuring 99.9 × 99.9 mm, with 18 components from 3 distinct parts.
Its main chip is the Arduino_Nano_Every, from the AVR/Arduino family. Other key parts include the TSSP58038. By type, the board carries 16 ICs, 1 module and 1 connector.
Main components on the IR board
IR board bill of materials (BOM)
18 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 16 | TSSP58038 | Vishay_MINICAST-3Pin | U1, U2, U3, U4, U5, U6, U7, U8 +8 |
| 1 | Arduino_Nano_Every | Arduino_Nano | A1 |
| 1 | CONN_01X05_SOCKET Conn_01x05_Socket | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1 |
IR board design files
The KiCad project lives in the kapibaratomo/Soda_DENGIKEN repository on GitHub; these links point at the commit this page was built from.
IR board: common questions
What microcontroller does the IR board use?
The IR board is built around the Arduino_Nano_Every, from the AVR/Arduino family.
How big is the IR board?
The IR board measures 99.9 × 99.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IR board?
18 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IR board design files?
From the kapibaratomo/Soda_DENGIKEN repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IR board design in my own project?
The repository has no license, so all rights stay with kapibaratomo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the IR board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Soda_DENGIKEN
Motor driver board 1.0
kapibaratomo
50 × 64 mm54 parts2LNo license0Motor driver board 1.0 (1)
kapibaratomo
54.1 × 63.9 mm49 parts2LNo license0AVR/Arduino
Mainboard2.0
kapibaratomo
94 × 100 mm42 parts2LNo license0Mein board
kapibaratomo
120 × 42.9 mm24 parts2LNo license0Power board 1.0 (1)
kapibaratomo
66.7 × 63.9 mm23 parts2LNo license0Power board 1.0
kapibaratomo
66.7 × 63.9 mm23 parts2LNo license0PSU board 1.0
kapibaratomo
50 × 64 mm23 parts2LNo license0AVR/Arduino
IRboard5.0
kapibaratomo
99.1 × 99.1 mm18 parts2LNo license0Linesensor3.1
kapibaratomo
25.6 × 65 mm15 parts2LNo license0Sentral board 1.0 (1)
kapibaratomo
40.6 × 35.9 mm9 parts2LNo license0AVR/Arduino
Arduino board
kapibaratomo
93.5 × 69 mm6 parts2LNo license0
Similar boards
AVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0kAVR/Arduino
Megadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818AVR/Arduino
Easyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746