Key-Chain
Kashan-Zahid·Key-Chain·pcb/key-chain.kicad_pcb
About the Key-Chain PCB
Key-Chain is an open source ESP32 PCB design by Kashan-Zahid, published on GitHub. It is a 2-layer board measuring 57 × 30 mm, with 2 components from 2 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. By type, the board carries 1 IC and 1 connector.
It belongs with the displays & leds designs in this gallery.
From the project
Key-Chain is a custom-designed, compact electronic keychain built around the Seeed XIAO ESP32-C3 and a small OLED display. It is designed to be portable, customizable, and easy to carry.
Main components on the Key-Chain
Key-Chain bill of materials (BOM)
2 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | MCU_Seeed_ESP32C3 | U1 |
| 1 | Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
Key-Chain design files
The KiCad project lives in the Kashan-Zahid/Key-Chain repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/key-chain.kicad_pcb
- Schematicpcb/key-chain.kicad_sch
- BOMBOM.csv
Key-Chain: common questions
What microcontroller does the Key-Chain use?
The Key-Chain is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Key-Chain PCB?
The Key-Chain measures 57 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Key-Chain?
2 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Key-Chain design files?
From the Kashan-Zahid/Key-Chain repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Key-Chain design in my own project?
The repository has no license, so all rights stay with Kashan-Zahid. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Key-Chain without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k