DropGenPCB FINAL
About the DropGenPCB FINAL PCB
DropGenPCB FINAL is an open source ESP32 PCB design by Katiekuehr, published on GitHub. It is a 2-layer board measuring 92.5 × 62.5 mm, with 20 components from 18 distinct parts.
Its main chip is the SEEED XIAO ESP32S3, from the ESP32 family. Other key parts include the TMC2209_SILENTSTEPSTICK, L293D and TPS5430DDAR. By type, the board carries 5 connectors, 5 capacitors, 4 ICs, 3 resistors, 2 diodes and 1 inductor.
Main components on the DropGenPCB FINAL
DropGenPCB FINAL bill of materials (BOM)
20 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SEEED XIAO ESP32S3 | ESP32S3 | U1 |
| 1 | TMC2209_SILENTSTEPSTICK | MC2209 numbers | U2 |
| 1 | L293D | L293D | U3 |
| 1 | TPS5430DDAR | TI_SO-PowerPAD-8_ThermalVias | U4 |
| 1 | JST_3_PIN JST_3_pin | 3_pin_jst | J1 |
| 1 | JST_4_PIN JST_4_pin | 4_pin_jst | J2 |
| 1 | C194407 Barrel_Jack_Switch | BarrelJack_GCT_DCJ200-10-A_Horizontal | J3 |
| 1 | C784935 Camera Terminal Block | terminal_block | J4 |
| 1 | C784935 Piezo | terminal_block | J5 |
| 1 | B340A_C3018525 | D_SMC | D1 |
| 1 | LED | LED_0603_1608Metric | D2 |
| 1 | 22UH 22uH | L_Vishay_IHLP-4040 | L1 |
| 1 | 100UF 100uF | C_Elec_6.3x7.7 | C1 |
| 1 | 220UF 220uF | CP_EIA-6032-15_Kemet-U | C2 |
| 1 | 10NF 10nF | C_0805_2012Metric | C3 |
| 2 | 4.7UF 4.7uF | C_1210_3225Metric | C4, C5 |
| 1 | C106225 10KΩ T | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 2 | 3.24kΩ | R_0603_1608Metric | R2, R3 |
DropGenPCB FINAL design files
The KiCad project lives in the Katiekuehr/Droplet_PCB repository on GitHub; these links point at the commit this page was built from.
DropGenPCB FINAL: common questions
What microcontroller does the DropGenPCB FINAL use?
The DropGenPCB FINAL is built around the SEEED XIAO ESP32S3, from the ESP32 family.
How big is the DropGenPCB FINAL PCB?
The DropGenPCB FINAL measures 92.5 × 62.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DropGenPCB FINAL?
20 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DropGenPCB FINAL design files?
From the Katiekuehr/Droplet_PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DropGenPCB FINAL design in my own project?
The repository has no license, so all rights stay with Katiekuehr. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DropGenPCB FINAL without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Droplet_PCB
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Esp32 minimal
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Controller
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k