HardLabs

PICO ADC TEST

kelu124·minus·design/pic0rick/adc/PICO_ADC_Test.kicad_pcb

PICO ADC TEST PCB layout, top view — open source RP2040/RP2350 board by kelu124
Simulate this board

About the PICO ADC TEST PCB

PICO ADC TEST is an open source RP2040/RP2350 PCB design by kelu124, published on GitHub. It is a 4-layer board measuring 85 × 54 mm, with 55 components from 24 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the ADC10065CIMT/NOPB, AD8331ARQZ, MCP4812-E/MS and MD0100N8-G. By type, the board carries 26 capacitors, 11 resistors, 7 connectors, 5 ICs, 5 inductors and 1 diode.

From the project

Minimal ultrasound platform

Schematics, PCB / layout, Gerbers, BOMs, and other design source files for reference designs (and, later, for minus itself). One subfolder per design, named to match the system slug in ../systems/ where one exists.

Convention: - design// — e.g. design/un0rick/, design/pic0rick/, design/iup/. - Put the raw design files here (KiCad, Gerbers, PDF schematics, BOM CSVs). - Cross-link from the matching systems//.md datasheet. - Large binaries are fine, but prefer the canonical/original files; note the upstream source (repo URL + commit/version) in a short SOURCE.md per subfolder.

Main components on the PICO ADC TEST

ADC10065CIMT/NOPBAD8331ARQZMCP4812-E/MSMD0100N8-GPico

PICO ADC TEST bill of materials (BOM)

55 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ADC10065CIMT/NOPB
ADC10065CIMT_NOPB
IC1
1
AD8331ARQZ
IC2
1
MCP4812-E/MS
MCP4812-E_MS
IC3
1
MD0100N8-G
U1
1
Pico
U2
1
142-0701-801
AMPHENOL_132357-11
J1
3
SSQ-101-02-L-Q-RA
J2, J5, J7
1
613012243121
61300611121
J3
1
61300411121
J4
1
613012243121
90122-0126
J6
1
BAV99-7-F
D1
5
BLM21BB750SN1D
ILHB1206ER750V
FB1, FB2, FB3, FB4, FB5
17
VJ1206Y104KXQCW1BC
100nF
C1, C2, C4, C5, C8, C9, C10, C11 +9
2
1206ZD475KAT4A
4.7uF
C3, C7
1
VJ1206Y183KXAAC
18nF
C6
1
VJ1206A220JXQPW1BC
22pF
C12
3
GRM31C5C3A102JWA3L
1nF
C18, C21, C23
1
12062A500KAT2A
50pF
KYOCERA AVX
C20
1
KAF31GR71C106KU
10uF
KYOCERA AVX
C25
3
WSL1206R1800FEA
18R
R1, R10, R11
Show 4 more
QtyPartRefs
4
1206W4F1002T5E
10K
R2, R3, R5, R6
2
560112132023
100R
R4, R8
1
CR1206-FX-2800ELF
280R
Bourns
R7
1
CR1206-FX-1202ELF
12K
Bourns
R9

PICO ADC TEST design files

The KiCad project lives in the kelu124/minus repository on GitHub; these links point at the commit this page was built from.

PICO ADC TEST: common questions

What microcontroller does the PICO ADC TEST use?

The PICO ADC TEST is built around the Pico, from the RP2040/RP2350 family.

How big is the PICO ADC TEST PCB?

The PICO ADC TEST measures 85 × 54 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the PICO ADC TEST?

55 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PICO ADC TEST design files?

From the kelu124/minus repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PICO ADC TEST design in my own project?

The repository has no license, so all rights stay with kelu124. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PICO ADC TEST without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in minus

Similar boards