7 open source boards using the MCP4812-E/MS

Real designs built with the MCP4812-E/MS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

The MCP4812-E/MS in open source designs

The gallery holds 7 open source boards using the MCP4812-E/MS from 4 GitHub repositories; a typical one measures about 85 × 54 mm and carries around 63 components.

100% use four copper layers or more, and 29% carry an open source license.

The most starred is 3 in 1 Panel by kelu124.

Microcontrollers on boards using the MCP4812-E/MS

What boards using the MCP4812-E/MS are built for

MCP4812-E/MS: common questions

Where can I find a MCP4812-E/MS reference design?

Each of the 7 boards on this page is a real design using the MCP4812-E/MS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the MCP4812-E/MS?

The AD8331ARQZ, MD0100N8-G, ADC10065CIMT/NOPB, MD1213K6-G and SN74LVC2G04DBVT appear in the most repositories here.

Which microcontrollers do boards using the MCP4812-E/MS use?

Most are built on RP2040/RP2350 (6).

How big is a typical board using the MCP4812-E/MS?

The median is 85 × 54 mm, and 0% are two-layer designs.

What is the most popular open source board using the MCP4812-E/MS?

By GitHub stars, 3 in 1 Panel by kelu124, with 107 stars.

Can I simulate one of these boards using the MCP4812-E/MS before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part