9 open source boards using the MD0100N8-G
Real designs built with the MD0100N8-G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
3 in 1 Panel
kelu124
87.1 × 78.3 mm63 parts4LTAPR-OHL-1.0107Msi SDR ADC
kelu124
85 × 54 mm88 parts4LNo license2RP2040/RP2350
Ultr4rick
kelu124
120 × 80 mm258 parts6LNo license0RP2040/RP2350
3 in 1 Panel
kelu124
87.1 × 78.3 mm63 parts4LNo license0RP2040/RP2350
PICO ADC TEST
kelu124
85 × 54 mm55 parts4LTAPR-OHL-1.0107RP2040/RP2350
PICO ADC Test
kelu124
85 × 54 mm55 parts4LNo license2RP2040/RP2350
PICO ADC TEST
kelu124
85 × 54 mm55 parts4LNo license0RP2040/RP2350
PicoRX-ADC
kelu124
80.3 × 54 mm52 parts2LNo license2Tobo
echopen
35.5 × 50 mm23 parts2LNo license19
How designs wire the MD0100N8-G
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MD0100N8-G connects to, and the resistors, capacitors and other passives placed on it.
- The COM pin is left unconnected on 5 of 5 designs.
- The B pin has a ferrite bead on 2 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| COMpin 2 | Connected to: Not connected 100% | — |
| Bpin 3 | Connected to: Signal 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 3 in 1 Panel by kelu124, Tobo by echopen, Msi SDR ADC by kelu124 and 3 in 1 Panel by kelu124.
The MD0100N8-G in open source designs
The gallery holds 9 open source boards using the MD0100N8-G from 5 GitHub repositories; a typical one measures about 85 × 54 mm and carries around 55 components.
78% use four copper layers or more, and 22% carry an open source license.
The most starred is 3 in 1 Panel by kelu124.
Parts used alongside the MD0100N8-G
Microcontrollers on boards using the MD0100N8-G
What boards using the MD0100N8-G are built for
MD0100N8-G: common questions
Where can I find a MD0100N8-G reference design?
Each of the 9 boards on this page is a real design using the MD0100N8-G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MD0100N8-G COM pin connected?
The COM pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MD0100N8-G.
How is the MD0100N8-G B pin connected?
The B pin has a ferrite bead on 2 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the MD0100N8-G.
What parts are used alongside the MD0100N8-G?
The AD8331ARQZ, MCP4812-E/MS, ADC10065CIMT/NOPB, MD1213K6-G and SN74LVC2G04DBVT appear in the most repositories here.
Which microcontrollers do boards using the MD0100N8-G use?
Most are built on RP2040/RP2350 (7).
How big is a typical board using the MD0100N8-G?
The median is 85 × 54 mm, and 22% are two-layer designs.
What is the most popular open source board using the MD0100N8-G?
By GitHub stars, 3 in 1 Panel by kelu124, with 107 stars.
Can I simulate one of these boards using the MD0100N8-G before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.