8 open source boards using the SN74LVC2G04DBVT

Real designs built with the SN74LVC2G04DBVT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the SN74LVC2G04DBVT

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74LVC2G04DBVT connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF.
  • The 1A pin has a resistor to GND on 2 of 5 designs, most often 10 kΩ.
  • The 2A pin has a resistor to GND on 2 of 5 designs, most often 10 kΩ.
1Apin 1Connected to: A connector 80%
  • Resistor to GND on 40% · 10 kΩ (2)
GNDpin 2Connected to: GND 100%
2Apin 3Connected to: A connector 80%, SN74LVC2G04DBVT 60%
  • Resistor to GND on 40% · 10 kΩ (2)
VCCpin 5Connected to: 5V 100%
  • Decoupling capacitor on 80% · 100 nF (7)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 3 in 1 Panel by kelu124, Driver by thewonderidiot, PMOD-Pulser update by kelu124 and 3 in 1 Panel by kelu124.

The SN74LVC2G04DBVT in open source designs

The gallery holds 8 open source boards using the SN74LVC2G04DBVT from 5 GitHub repositories; a typical one measures about 87.1 × 78.3 mm and carries around 63 components.

63% use four copper layers or more, and 63% carry an open source license.

The most starred is 3 in 1 Panel by kelu124.

Parts used alongside the SN74LVC2G04DBVT

Microcontrollers on boards using the SN74LVC2G04DBVT

SN74LVC2G04DBVT: common questions

Where can I find a SN74LVC2G04DBVT reference design?

Each of the 8 boards on this page is a real design using the SN74LVC2G04DBVT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SN74LVC2G04DBVT VCC pin?

The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the SN74LVC2G04DBVT.

What resistor goes on the SN74LVC2G04DBVT 1A pin?

The 1A pin has a resistor to GND on 2 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the SN74LVC2G04DBVT.

What resistor goes on the SN74LVC2G04DBVT 2A pin?

The 2A pin has a resistor to GND on 2 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the SN74LVC2G04DBVT.

What parts are used alongside the SN74LVC2G04DBVT?

The MD1213K6-G, TC6320TG-G, MCP4812-E/MS, MD0100N8-G and Pico appear in the most repositories here.

Which microcontrollers do boards using the SN74LVC2G04DBVT use?

Most are built on RP2040/RP2350 (3).

How big is a typical board using the SN74LVC2G04DBVT?

The median is 87.1 × 78.3 mm, and 38% are two-layer designs.

What is the most popular open source board using the SN74LVC2G04DBVT?

By GitHub stars, 3 in 1 Panel by kelu124, with 107 stars.

Can I simulate one of these boards using the SN74LVC2G04DBVT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part