6 open source boards using the MD1213K6-G

Real designs built with the MD1213K6-G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filtersOpen license only|Most starred Recently updated Most components

The MD1213K6-G in open source designs

The gallery holds 6 open source boards using the MD1213K6-G from 4 GitHub repositories; a typical one measures about 87 × 50.3 mm and carries around 53 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is 3 in 1 Panel by kelu124.

Parts used alongside the MD1213K6-G

Microcontrollers on boards using the MD1213K6-G

RP2040/RP2350 3

MD1213K6-G: common questions

Where can I find a MD1213K6-G reference design?

Each of the 6 boards on this page is a real design using the MD1213K6-G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the MD1213K6-G?

The SN74LVC2G04DBVT, TC6320TG-G, MCP4812-E/MS, MD0100N8-G and Pico appear in the most repositories here.

Which microcontrollers do boards using the MD1213K6-G use?

Most are built on RP2040/RP2350 (3).

How big is a typical board using the MD1213K6-G?

The median is 87 × 50.3 mm, and 50% are two-layer designs.

What is the most popular open source board using the MD1213K6-G?

By GitHub stars, 3 in 1 Panel by kelu124, with 107 stars.

Can I simulate one of these boards using the MD1213K6-G before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.