Alien Screamer Synth
kepaodri·Alien_Screamer_Synth·hardware/AlienScreamer_Prototype_V1.kicad_pcb
About the Alien Screamer Synth PCB
Alien Screamer Synth is an open source PCB design by kepaodri, published on GitHub. It is a 4-layer board measuring 250 × 119.5 mm, with 71 components from 35 distinct parts.
Other key parts include the LM358 and LM386. By type, the board carries 30 resistors, 17 capacitors, 4 switches, 3 ICs, 3 transistors and 3 connectors.
It belongs with the audio designs in this gallery.
From the project
PCB design for "Alien Screamer" synthesizer (original design by Ray Wilson) in 4-layer stackup using THT components.
For more detailed technical information and the original schematics, visit the MFOS Alien Screamer Noise Box

Main components on the Alien Screamer Synth
Alien Screamer Synth bill of materials (BOM)
71 components, 35 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LM358 | DIP-8_W7.62mm_Socket_LongPads | U1, U2 |
| 1 | LM386 | DIP-8_W7.62mm_Socket_LongPads | U3 |
| 2 | 2N3904 | TO-92_Inline | Q1, Q2 |
| 1 | Q_NJFET_DGS | TO-92_Inline | Q3 |
| 1 | Jack-DC | BarrelJack_Horizontal | J1 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J2, J3 |
| 1 | GND | TestPoint_THTPad_D3.0mm_Drill1.5mm | GND1 |
| 1 | LFO_SHAPE | TestPoint_THTPad_D3.0mm_Drill1.5mm | LFO1 |
| 1 | 1M | Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV1 |
| 3 | 100K | Potentiometer_Bourns_PTV09A-1_Single_Vertical | RV2, RV3, RV4 |
| 4 | SW_SPDT | SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1, SW2, SW3, SW4 |
| 1 | VNEG | TestPoint_THTPad_D3.0mm_Drill1.5mm | VNEG1 |
| 1 | VPOS | TestPoint_THTPad_D3.0mm_Drill1.5mm | VPOS1 |
| 2 | LED | LED_D5.0mm | D1, D3 |
| 1 | 1N914 | D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
| 2 | 1uF | CP_Radial_D5.0mm_P2.00mm | C1, C3 |
| 2 | 1uF | C_Rect_L13.0mm_W5.0mm_P10.00mm_FKS3_FKP3_MKS4 | C2, C8 |
| 1 | 100pF | C_Disc_D4.7mm_W2.5mm_P5.00mm | C4 |
| 1 | 1nF | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C5 |
| 1 | 10nF | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C6 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 470uF | CP_Radial_D10.0mm_P5.00mm | C7 |
| 5 | 100nF | C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C9, C14, C15, C16, C17 |
| 2 | 10uF | C_Disc_D7.5mm_W4.4mm_P5.00mm | C10, C11 |
| 1 | 47nF | C_Rect_L7.0mm_W2.5mm_P5.00mm | C12 |
| 1 | 220uF | CP_Radial_D8.0mm_P3.50mm | C13 |
| 5 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R11, R12 |
| 9 | 100K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5, R6, R9, R16, R22, R23, R24 +1 |
| 4 | 4.7K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R25, R26, R28 |
| 2 | 75K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8, R10 |
| 1 | 220K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13 |
| 4 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14, R18, R19, R20 |
| 2 | 2M | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R15, R17 |
| 1 | 15K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R21 |
| 1 | 10 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R29 |
| 1 | 390 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R30 |
Alien Screamer Synth design files
The KiCad project lives in the kepaodri/Alien_Screamer_Synth repository on GitHub; these links point at the commit this page was built from.
Alien Screamer Synth: common questions
How big is the Alien Screamer Synth PCB?
The Alien Screamer Synth measures 250 × 119.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Alien Screamer Synth?
71 components, from 35 distinct parts. The full bill of materials is listed on this page.
Where can I download the Alien Screamer Synth design files?
From the kepaodri/Alien_Screamer_Synth repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Alien Screamer Synth design in my own project?
The repository has no license, so all rights stay with kepaodri. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687